Manufacturer

Description

Price

Order

Icom

HF/6M Automatic Antenna Tuner. Directly feeds whip or wire - no coax connector on output.

• Covers 3.5-54MHz with a 7m(23') or longer wire antenna.

LDG

The AT-1000ProII will tune from 1.8 to 54.0 MHz continuously, and will match an amazing range of antennas.

• 1000W SSB/750W CW
  500W Digital/250W 6M
• Two position antenna switch with 2000 memories for each position.
• Weight: 5.0 pounds
• Includes DC power cable.

LDG

The AT-100PROII desktop tuner covers all frequencies from 1.8-54 MHz, and will automatically match your antenna in no time!

• 1-125W (SSB and CW)
• 100W on 6M
• 4000 Memories
• Weight: 1.5 pounds
• Includes DC power cable.

LDG

The AT-200PROII desktop tuner covers all frequencies from 1.8-54 MHz, and will automatically match your antenna in no time.

• 5-250W (SSB and CW)
• 100W on 6M
• 4000 Memories
• Weight: 2 pounds
• Includes DC power cable.

LDG

The AT-600PROII will tune from 1.8-54MHz continuously and will handle up to 600 watts. Designed to work with the mid-sized amps.

• 600W SSB/CW
  300W RTTY(250W on 6M)
• Easy to read LED bar graph display for RF power, SWR and status.
• Two position antenna switch with memories for each position.
• 4000 Memories
• For Dipoles, Verticals, Vs, Beams or Coax Fed Antennas.
• Weight: 3 pounds
• Includes DC power cord

LDG

Interface Cable - Yaesu CAT Port.

LDG

The IT-100 is the ideal tuner for your shiny new Icom radio. It matches up to 10:1 SWR (3:1 on 6 meters), so just about anything you can feed with coax is good to go.

• 0.1 to 125W (SSB and CW)
• 100W on 6M.
• 2000 Memories
• Weight: 1.5 pounds
• Includes Icom interface cable.

LDG

The RT-100 is a coax in / coax out tuner designed to be placed near the feedpoint of the antenna. With the RT-100 near the feedpoint, it will virtually eliminate all feed line loss due to SWR. The RT-100 is DC powered over the coax, so no extra cables are needed. Add your own DC injection circuit or use the LDG RC-100 to power and control the tuner from your shack.

• 0.1 to 100 watt power range (SSB and CW), 30 watt digital.
• 2000 memories for instantaneous band changing.
• Powered over the coax.
• Tuning time: 0.1 to 6 seconds full tune, 0.1 seconds memory tune.
• 1.8 to 54.0 MHz coverage. Built-in frequency sensor.
• Weight: 1 pound

LDG

The YT-100 is the ideal tuner for your FT-857/897/100(including all D models).

• 1.8-54MHz coverage
• 1-100W SSB/CW and digital modes.
• 2000 Memories
• Weight: 20 ounces
• Includes 1' CAT interface cable.

LDG

The YT-1200 Autotuner for Yaesu Radios.

• Built-in CAT/Power interface for FT-450(D), FT-950, FTDX-1200, FTDX-3000 radios.
• Also interfaces with FT-2000 (non-D) with external DC power supply.
• 1.8-54MHz coverage.
• 1-100W SSB/CW and digital modes.
• 2000 Memories
• SO-239 in and out connections for dipoles, verticals, beams, G5RV, OCF, Cobra, etc.
• Weight: 2 pounds
• Includes 1.5' CAT/Power interface cable.
• Available Sept 2014.

LDG

The Z-100PLUS is small and simple to use.

• 1.8-54MHz coverage
• 0.1-125W on SSB/CW and digital modes.
• 2000 Memories
• Includes DC power cable

LDG

The Z-11PROII is everything you always wanted in a small portable tuner designed from the ground up for battery operation.

• 1.8-54MHz coverage
• 0.1-125W SSB/CW
  100W on 6M
• 2000 Memories
• Includes DC power cable.

MFJ

The MFJ-941E Versa Tuner II will tune from 1.8-30MHz.

• Handles 300 watts
• Cross-Needle Meter
• 2 coax outputs plus balanced line
• multi position antenna switch

MFJ

The MFJ-945E Mobile Tuner will tune from 1.8-60MHz.

• Handles 300 watts.
• Super compact size:
  8Wx2Hx6D inches
• Antenna Bypass Switch.

MFJ

The MFJ-949E Deluxe Versa Tuner II will tune from 1.8 to 30MHz.

• 300/30 watts
• Cross-Needle Meter
• Built-in Dummy Load
• Built-in 4:1 balun

MFJ

The MFJ-989D Versa Tuner V is one of the most popular legal limit tuners around.

• 1.8-30MHz including MARS/WARC bands.
• Full 1500 watts SSB/CW
• AirCore Roller Inductor with fast-tune Crank Knob.
• High-Voltage Current Balun.
• Built-in Dummy Load.

MFJ

The MFJ-993B Intelli-Tuner lets you tune any antenna automatically.

• 300/150 Watts
• 1.8-30MHz...Backlit LCD
• Remote Control Port

MFJ

The MFJ-994B Automatic Antenna Tuner will tune from 1.8-30MHz.

• 600 Watts Intelli-Tuner
• Matches 12-800 ohms
• Tuning must be done at low transceiver power with amplifier bypassed.