Manufacturer

Description

Price

Order

RF Parts

Silicone WeatherProofing Tape

• Self Fusing:
  Sticks/Bonds Only to Itself
• No Adhesive -Leaves No Residue
• Stretches up to 300% - Conforms to Irregular Shapes
• Withstands Exposure up to 500F.
• Create a long lasting air and water tight seal
• Size: 1" x 10'

Davis RF

• Flat Tinned Grounding Braid
• Width: 1/2"
• Length: 25'

Davis RF

• 100' #14 polyethylene black jacketed FLEX-WEAVE.
• 168 copper strands for high abrasion/rodent resistance.
• It is excellent for quads, dipoles and long wires.

Davis RF

• 150' #14 polyethylene black jacketed FLEX-WEAVE.
• 168 copper strands for high abrasion/rodent resistance.
• It is excellent for quads, dipoles and long wires.

Davis RF

• 100' #14 hard drawn bare copper.
• 7 strands of #22 hard drawn bare copper.

Davis RF

• 150' #14 hard drawn bare copper.
• 7 strands of #22 hard drawn bare copper.

Davis RF

• 75' #14 hard drawn bare copper.
• 7 strands of #22 hard drawn bare copper.

LDG

• Remote 1:1 current balun.
• 1.8 to 30 MHz.
• Up to 200 watts.

LDG

• Remote 4:1 Voltage balun.
• 1.8 to 30 MHz.
• Up to 200 watts

LDG

• Remote 4:1 Unun.
• 1.8 to 30 MHz.
• Up to 200 watts.

PLE

• Center insulator for
  450 OHM ladderline.

Princeton Antennas

160-10M 1:1 BALUN 1.5KW The 1:1 balun is used in an antenna system that has, at its feedpoint, a 50-75ohm impedance. Typical antennas in this realm are the Dipole, Inverted "V", and Inverted "L".

Princeton Antennas

160-10M Current Balun

High performance dual core balun. Ideal for 50 ohm inverted L or vertical antennas. Works great for dipoles as well but requires adequate support. Rated at 1.5KW++

Princeton Antennas

4:1 CURRENT BALUN 1.5KW

• 1.8 - 54MHz
• 1.5KW @ <1.5 SWR

Princeton Antennas

4:1 Current Balun

• 1.8-30MHz
• 300 Watts

Princeton Antennas

1.5KW HF Common Mode Choke

• The Princeton CMC is a common mode choke designed to be installed in-line with your coax. It is rated at 1.5KW and housed in a compact enclosure. Typical placement is just before the feed line enters your house. This in-line choke provides over 4700 ohms of choking impedance at 1.9 MHz, 4200 ohms at 3.7 MHz and 1,800 ohms at 7.2 MHz.

Princeton Antennas

1.5KW HF Common Mode Choke, High Power

• The Princeton CMC HP is a common mode choke, designed to be installed in-line with your coax. It is rated at 1.5KW+ and is housed in a water proof enclosure. Typical placement is just before the feed line enters your house. This in-line choke provides over 1400 ohms of choking impedance at 1.9 MHz, 5600 ohms at 3.7 MHz and 3500 ohms at 7.2 MHz.

Princeton Antennas

CENTER INSULATOR UHF(F)/WIRE

Princeton Antennas

1Ft long 1/2" Flat Tinned Copper Ground Braid with Ring Terminals attached for easy installation to your equipment.

Princeton Antennas

1.5Ft long 1/2" Flat Tinned Copper Ground Braid with Ring Terminals attached for easy installation to your equipment.

Princeton Antennas

10Ft long 1/2" Flat Tinned Copper Ground Braid with Ring Terminals attached for easy installation to your equipment.

Princeton Antennas

3Ft long 1/2" Flat Tinned Copper Ground Braid with Ring Terminals attached for easy installation to your equipment.

Princeton Antennas

5Ft long 1/2" Flat Tinned Copper Ground Braid with Ring Terminals attached for easy installation to your equipment.

Princeton Antennas

4:1 UNUN 1.5KW

• Covers 1.8-30MHz
• Fiberglass wound double core
• #12 windings with Teflon tubing
• Conservatively rated at 1.5KW
• rugged all weather housing
• Designed for use with non-resonant
  random wire antennas as well as
  43 and 31 ft verticals.

Rohn

• Rohn 4" galvanized wall mount.
• Includes upper and lower bracket.
• Will support mast up to
  2-1/4" O.D.
• Includes carriage bolts and
  1-3/4" long lag screws.

Rohn

• Extra heavy duty wall mount bracket to mount masts 8" away from wall.
• Holds masts with diameters from 1-1/4" to 2-1/4".
• Upper and lower bracket are made of heavy gauge galvanized steel. Lower support pipe is 18 gauge tubing.
• Includes carriage bolts and
  1-3/4" long lag screws.

Synthetic Textiles

• 100' Roll 1/8" Black Dacron rope.
• Break Strength: 420 lbs.

Synthetic Textiles

• 100' Roll 3/16" Black Dacron rope.
• Break Strength: 770 lbs.

Synthetic Textiles

• 1000' Roll 3/16" Black Dacron rope.
• Break Strength: 770 lbs.

Synthetic Textiles

• 350' Roll 3/16" Black Dacron rope.
• Break Strength: 770 lbs.

Synthetic Textiles

• 500' Roll 3/16" Black Dacron rope.
• Break Strength: 770 lbs.

Synthetic Textiles

• 100' Roll 3/32" Black Dacron rope.
• Break Strength: 260 lbs.

Workman

• Nylon Dog Bone Insulator.

Workman

• Ceramic Dog Bone Insulator.

Workman

• Small White Ceramic Insulator.