Manufacturer

Description

Price

Order

ARC

6' shielded serial cable DB9(F)/25(M)

ARC

6' shielded serial cable DB9(F)/9(M)

ARC

6' shielded serial cable 8PMD/DB9(F)

ARC

KPC-3 TNC to Radio* Cable.

• Most radio cables are listed under catalog search "Cables - TNC". If your radio is not on this list, you may use this to order. Most, but not all, cables are $39.95.
• If your cable is more than $39.95 we will contact you before proceeding.
• Cables are made of 4' shielded cable.
• These cables are custom made for your specific radio.

*You will need to specify your radio model in the Special Instructions during check out.

ARC

Your TNC* to Your Radio* Cable.

• Cables are made of 4' shielded cable.
• These cables are custom made for your specific TNC and radio.

ARC

Kam XL VHF to Radio* Cable.

• Cables are made of 4' shielded cable.
• These cables are custom made for your specific radio.

ARC

Kam XL HF to Radio* Cable.

• Cables are made of 4' shielded cable.
• These cables are custom made for your specific radio.

*You will need to specify your radio model in the Special Instructions during check out.

ARC

Kam XL HF w/CW to Radio* Cable.

• Cables are made of 4' shielded cable.
• These cables are custom made for your specific radio.

ARC

KPC-9612 1200 baud to Radio* Cable.

• Cables are made of 4' shielded cable.
• These cables are custom made for your specific radio.

ARC

KPC-9612 9600 baud to Radio* Cable.

• Cables are made of 4' shielded cable.
• These cables are custom made for your specific radio.

Calrad

6' USB A/B cable.

LDG

• Description:
  The IC-PAC interface cable(14" long) provides DC power and control between the radio and the autotuner.
• Supported Radios:
  This interface cable will work with any Icom radio that supports the Icom AH-3 or AH-4 Tuner. Please check your radio's manual.
• Functionality:
  Pressing the tune button quickly on the tuner by-passes the tuner. Pressing and holding the tune button on the radio or tuner starts the tune process.

LDG

• Description:
  12" cable interface between select Yaesu radios and LDG Generic tuners. Does not supply DC to tuner.
• Radios:
  FT-857, FT-897, FT-891, FT-100 series (including "D" models) and FT-991.
• Functionality:
  Pressing the tune button on the tuner changes the mode of the radio to CW (mode change does not appear on radio display), tunes, then returns the radio to the previous mode.
  For FT-991, set menu item 143 to L AMP (for Linear Amp) and use the ALC/REM jack (red end to radio).

RT Systems

USB to Serial Adapter - FTDI chipset, DB-9(m).

RT systems

USB to 3.5MM stereo cable: Works the same as the Icom OPC-478UC
for programming memory channels

RT Systems

Computer Interface Cable:
USB to Yaesu 6-pin mini din
for programming memory channels.

RT Systems

USB to 6-pin modular plug programming cable. 6' cable length.
Fits following Yaesu models:
FT-1500 FT-1802 FT-1807 FT-1900 FT-1907 FT-2800 FT-2900 FT-2980 FTM-3100 FTM-3200 FTM-7250

RT Systems

Computer Interface Cable:
USB to extended Yaesu 4-pin push-in connection.
Fits following Yaesu models:
VX-6 VX-7 FT-70D VX-120 VX-127 VX-170 VX-177 FT-270 FT-277

RT Systems

Computer Interface Cable:
USB to Yaesu 8-pin mini din
for programming and CAT control.

RT Systems

The USB-63B cable is designed to work with HF rigs that have a 9-pin male CAT connector. The cable addresses Yaesu and Kenwood radio models that use a "straight thru" (not null-modem) serial to serial cable for connection to your computer.

RT Systems

USB to mini USB connector programming cable.
Fits following Yaesu models:
FT-1D FT-2D FT-3D FT-5DR

RT Systems

USB to 10 pin radio connector programming cable. 6' cable length.
Fits following Yaesu models:
FTM-100 FTM-200 FTM-300DR FTM-400 FTM-500 FTM-6000

RT Systems

Computer interface for Icom HF radios. Can be used for radio control(other software needed) with any radio that uses the
CT-17 interface cable.