Manufacturer: 
KANTRONICS

Model: 
KPC-3+ SERIAL

Price:
$289.95

Associated Products

Manufacturer

Model

Description

Price

Order

Calrad

90-772-6B

9 Volt Battery clip w/6" lead. Completely insulated, snap fastener type with color-coded leads.

Kantronics

9VUG

Install internal 9V battery clip in KPC-3+ (9V battery NOT included). This is a SERVICE that is performed on a Kantronics KPC-3+ purchased at the same time.

ARC

CAB K101

Kantronics 1200 baud TNC to radio cable.

• DB-9(m) to 6 pin mini DIN plug.
• Connects 1200 baud port on Kantronics TNC to most late model VHF/UHF dual band FM transceivers with DATA port.

Compatible models include but not limited to:

• KENWOOD:TM-733A, V7A, V708A, V71A, D700A, D710A/G
• ICOM: IC-706MKIIG, Ic-2720, IC-7100
• YAESU: FT-100, 875/D, 897/D, 7800, 8800 and 8900

ARC

CAB K102

DB-9(m) to 6 pin mini DIN plug. Connects Kantronics KPC-3/+ TNC to Icom IC-7000 DATA port.

ARC

CAB K103

DB-9(m) to Yaesu 2 pin speaker mic. Connects 1200 baud port on Kantronics TNC to Yaesu HT's such as FT-23, 411 and FT-530.

ARC

CAB K104

DB-9(m) to Icom 2 pin speaker mic with straight connector. Connects 1200 baud port on Kantronics TNC to Icom HT. Compatible models such as IC-2AT, O2AT, T2H and T7H. Specifically not included is the ID-51A

ARC

CAB K105

DB-9(m) to Yaesu single pin speaker mic. Connects 1200 baud port on Kantronics TNC to Yaesu HT's such as the FT-1DR, 2DR, VX-5R, FT-50, 60R and 70DR. Specifically excludes water proof models with threaded speaker mic connections. This cable also fits Icom models with single pin speaker mic such as the IC-P7A

ARC

CAB K106

DB-9(m) to Yaesu threaded single pin speaker mic. Connects 1200 baud port on Kantronics TNC to Yaesu HT's such as the VX-6R, VX-7R, FT-170 and 270.

ARC

CAB K107

DB-9(m) to Kenwood 2 pin speaker mic. Connects 1200 baud port on Kantronics TNC to all Kenwood hand held VHF/UHF transceivers EXCEPT TH-2500. Also fits Chinese radios that are speaker mic compatible with Kenwood. Models include but not limited to Tytera, Wouxun and, Baofeng.

ARC

CAB K108

DB-9(m) to Kenwood 13P DIN accessory. Connects 1200 baud port on Kantronics TNC to Kenwood transceivers such as TS-2000S and 2000X

ARC

CAB K109

DB-9(m) to Yaesu RJ-45 mic and external speaker. Connects 1200 baud port on Kantronics TNC to Yaesu mobile radios such as FT-2400 and FT-2500.

ARC

CAB K110

DB-9(m) to Icom RJ-45 mic and external speaker. Connects 1200 baud port on Kantronics TNC to Icom mobile radios such as IC-2100, 2200, 2300, 2730, 4100, 5100 and V8000.

ARC

CAB K111

DB-9(m) to Yaesu RJ-12 mic and external speaker. Connects 1200 baud port on Kantronics TNC to Yaesu mobile radios such as FT-1802R, 1900R, 2900/2980R and FTM-3100/3200/7250 as well as others.

ARC

CAB K112

DB-9(m) to Icom 8Pin mini DIN. Connects 1200 baud port on Kantronics TNC to Icom mobile radios such as ID-800H.

ARC

CAB K113

DB-9(m) to Icom 13 pin DIN. Connects 1200 baud port on Kantronics TNC to Icom transceivers such as IC-7000, 7100 and 9100.

ARC

CAB K114

DB-9(m) to Icom 8 pin DIN. Connects 1200 baud port on Kantronics TNC to Icom transceivers. Works with IC-820H, 821H and IC-9700*. Also works with HF radios with 8 pin DIN ACC port when 1200 baud PACKET is desired for 10M use.

*Note: When used with IC-9700 the KPC-3+ TX TAIL command must be advanced to accommodate the internal delay of the IC-9700. We suggest a starting point of 30.

Feel free to call us if you have any questions regarding the IC-9700.

ARC

CAB K115

DB-9(m) to Kenwood RJ-45 mic and external speaker. Connects 1200 baud port on Kantronics TNC to Kenwood mobile radios such as TM-261A, 271A and 281A and other radios that are microphone compatible with Kenwood.

ARC

CAB K116

DB-9(m) to Icom round 8 pin mic and external speaker. Connects 1200 baud port on Kantronics TNC to Icom mobile radios such as IC-25A, 27A, 28A/H, 251A.

ARC

CAB K117

DB-9(m) to Kenwood round 8 pn mic and external speaker. Connects 1200 baud port on Kantronics TNC to Kenwood mobile radios such as TM-221A, 231A, 241A, 621A, 721A, 731A and other radios that are microphone compatible with Kenwood.

ARC

CAB K118

DB-9(m) to Alinco DB-9(m). Connects 1200 baud port on Kantronics TNC to Alinco mobile radios such as DR-135T, 235T and 245T.

ARC

CAB K119

DB-9(m) to Alinco RJ-45 mic and external speaker. Connects 1200 baud port on Kantronics TNC to Alinco mobile radios such as DR-140T and 605T.

ARC

CAB K120

DB-9(m) to Anytone mobile with RJ45 microphone. Connects 1200 baud port on Kantronics TNC to Anytone RJ45. NOTE: Not all Anytone mobile radios with RJ45 mic will work. The AT-D578UV WILL NOT WORK and there may be others. Please contact us to confirm compatibility with your model.

ARC

CAB K121

DB-9(m) to Yaesu 8 pin mic. Connects 1200 baud port on Kantronics TNC to Yaesu FT-212RH and FT-2200M only.

ARC

CAB K122

DB-9(m) to Yaesu 8 pin mini DIN. Connects 1200 baud port on Kantronics TNC to Yaesu FTM-350R

ARC

CAB K123

DB-9(m) to Alinco round 8 pin mic and external speaker jack. Connects 1200 baud port on Kantronics TNC to Alinco DR-110, 112, 130, 140, and 430.

ARC

CAB K124

DB-9(m) to Alinco single pin threaded speaker mic. Connects 1200 baud port on Kantronics TNC to Alinco G17 and 29.

ARC

CAB K125

DB-9(m) to Icom ID-51A and 52A exclusively.

ARC

CAB K127

DB-9(m) to Yaesu 10 pin DIN. Connects 1200 baud port on Kantronics TNC to Yaesu FTM-100DR, 200DR 300DR, 400DR/XDR, 500DR and FTM-6000.

ARC

CAB K128

DB-9(m) to Motorola 16 pin accy. Connects 1200 baud port on Kantronics TNC to Motorola GM-300, 400 and Maxtrac.

ARC

CAB K129

DB-9(m) to Baofeng RJ-45 microphone and external speaker jack.

ARC

CAB USB-KAN25

USB to DB25(M) cable - works with the older model KPC-3+ and 9612+.

ARC

HCD12-200

12V 200mA grounded power supply for KPC-3+, KPC-9612+, KAM-XL and most Kantronics TNC's

ARC

TNC CABLE - KPC-3

KPC-3 TNC to Radio* Cable.

• Most radio cables are listed under catalog search "Cables - TNC". If your radio is not on this list, you may use this to order. Most, but not all, cables are $39.95.
• If your cable is more than $39.95 we will contact you before proceeding.
• Cables are made of 4' shielded cable.
• These cables are custom made for your specific radio.

*You will need to specify your radio model in the Special Instructions during check out.