Associated Radio

 

View Cart

Checkout


LDG - AT-1000PROII

Catalog | Manufacturer Search <-- back



Manufacturer: 
LDG

Model: 
AT-1000PROII

Price:
$539.95

Building on the success of the AT-1000PRO, LDG Electronics has refined and expanded its flagship 1KW tuner.

The AT-1000ProII has an Auto mode that automatically starts a tuning cycle any time the SWR exceeds a limit you set. Also, there are provisions for two antennas; you can switch between them any time you need. For each antenna, there are 2,000 memories that store tuning parameters for almost instantaneous tuner setting whenever you transmit on or near a frequency you've used before. Just key and it tunes! The AT-1000ProII will operate at any power level between 5 and 1,000watts peak RF input.

The AT-1000ProII has a large, easy to read bargraph with two selectable scale ranges (100 and 1,000 watts) as well as SWR meter. The AT-1000ProII will interface with many popular transceivers, enabling their TUNE button to control the AT- 1000ProII's operation. Dedicated control buttons allow you to fine-tune capacitance and inductance on those rare occasions when the AT-1000ProII can't find a perfect match by itself.

The AT-1000ProII will tune from 1.8 to 54.0MHz continuously, and will match an amazing range of antennas, from Yagis and dipoles to inverted-Vs and slopers; virtually any coax-fed antenna from 6 to 1000 ohms impedance (16 - 150ohms on 6 meters). Tuning time is usually under 10 seconds. If you're transmitting near a frequency with stored tuning parameters, it will set those parameters in under 0.2 seconds. Longwires or antennas fed with ladder line require an external balun.

 

The AT-1000ProII will tune from 1.8 to 54.0 MHz continuously, and will match an amazing range of antennas.
  • 1000W SSB/750W CW
    500W Digital/250W 6M
  • Two position antenna switch with 2000 memories for each position.
  • Weight: 5.0 pounds
  • Includes DC power cable.

Associated Products


Picture



Manufacturer



Model



Description



Price



Order



ARC

1403

2.5MM power cord w/power pole connectors.

$13.95







LDG

IC-PAC

  • Description:
    The IC-PAC interface cable(14" long) provides DC power and control between the radio and the autotuner.
  • Supported Radios:
    This interface cable will work with any Icom radio that supports the Icom AH-3 or AH-4 Tuner. Please check your radio's manual.
  • Functionality:
    Pressing the tune button quickly on the tuner by-passes the tuner. Pressing and holding the tune button on the radio or tuner starts the tune process.

$10.00







 

Back to top?