Manufacturer

Description

Price

Order

Icom

Commercial Grade 144MHz Mobile

• Power: 65W RF output
• 207 Memory Channels
• MIL-STD 810G specifications.
• Built-in CTCSS/DTCS encode/decode
• Dynamic Memory Scan(DMS)
• Selectable LCD Backlight color
  (amber, yellow or green)

Icom

HF/VHF/UHF Portable QRP Transceiver

• HF/50/144/430 MHz All Mode, with D-Star DV
• Maximum output power:
  10W (13.8 V DC)
  5W (BP-272)
• Compact & Lightweigt Design
• Large touchscreen color display
• RF direct sampling system
• Real-time spectrum scope
  and waterfall display.

Icom

• Simple operation with a modern black display
• Instant volume loud and mute functions
• 4.5W of loud and clear audio
• Large heatsink in the radio helps ensure stable output during continuous transmissions.

Icom

144/440MHz D-STAR/Analog HT with GPS.

• The PLUS2 adds Terminal and Access Point modes for your own personal communications portal into the Global *D-STAR network!
• Output Power:
  5.5/2.5/1/0.5 Watts
• Channels: 1304
• RX Frequencies:
  A Band - 136-174MHz, 380-479MHz
  B Band - 108-174MHz, 380-479MHz
• GPS: built-in

Icom

144/440MHz 50W DIGITAL MOBILE

• Comes D-Star ready
• Wideband Receiver
• 1052 Memory Channels
• Data and 9600/1200bps packet jacks on the rear panel

Yaesu

• High Speed Active-Tuning Antenna System
• Provides HF/VHF/UHF coverage with automatic motorized tuning.
• Its compatible with the
  FT-857/847/897/891/991/FTDX10 Series.

Yaesu

144MHz 80W Heavy Duty FM Mobile Transceiver

• Power: 80/30/10/5 Watts
• 200 Memory Channels
• Large 6 digit Backlit LCD
• 3 watts of Audio Output
• Alpha-Numeric Channel Display
• Dual Watch
• Receives 136-174MHz
• Warranty: 3 years

Yaesu

144MHz 65W FM Mobile Transceiver

• The FT-3165R is the same as the FT-3165R ASP but without the ASP (Audio Digital Signal Processing Unit) installed. The ASP module (SPU-1) is sold separately and can be installed at a later date updating the radio to the full ASP version.
• Transmit Power: 65W
• Selectable: 65/30/5 W
• FACC: Funnel Air-Convection
  Conductor(Wind Tunnel) cooling system
• Super-DX
• Memory Channels: 220
• DTMF Microphone

Yaesu

144MHz 65W FM Mobile Transceiver

• Transmit Power: 65W
• Selectable: 65/30/5 W
• FACC: Funnel Air-Convection
  Conductor(Wind Tunnel) cooling system
• Super-DX & ASP
• Memory Channels: 220
• DTMF Microphone

Yaesu

144/440MHz 5 watt FM Handheld

• Compact and Lightweight,
  yet ruggedly constructed.
• Versatile Scanning Capabilities
• Receive coverage is 65-108(FM broadcast band), 136-174 and 400-480 MHz.

Yaesu

144/440MHz C4FM/FM Digital HT

• System Fusion Compatible
• High Visibility Full-Color TFT & Touch Panel Display
• High Speed Band Scope function
• Wires-X Portable Digital Node Function
• TOUCH & GO Operation with Activity Monitor
• Built-in Bluetooth Unit
• Robust Rubber Protection
• IPX7 rating Water Protection
• Receives: .5-999MHz
• Transmits: 144-148/430-450MHz

Yaesu

144/440MHz 5-Watt FM HT

• 5 watts output
• Backlit keypad
• NOAA weather alert

Yaesu

144/440MHz 5W FM Handheld

• 5 watts Output:
  Selectable 5W/2.5W/0.5W
• Compact design:
  2.1"W x 4.1"H x 1.2"D
• Rugged Construction:
  Meets IP54 Rating,
  MIL-810-C,D & E.
• QRK(Quick Recall Key):
  Four User Programmable Keys
• FM Broadcast Receiver
  65 - 108 MHz
• WX Channels with "Severe Weather" Alert
• Warranty: 3 Years

Yaesu

144/440MHz 50/45W FM MOBILE

• YSK-7800 remote kit INCLUDED
• Large backlit LCD Display
• Over 1000 Memory Channels
• NOAA Weather Alert(USA only)

Yaesu

HF/VHF/UHF 5W BACKPACK TRANSCEIVER

• Ultra compact HF/VHF/UHF multimode rig
• Wide receiver frequency coverage
• Two antenna connectors for ease of installation
• Outstanding CW features
• Versatile, easy-to-see liquid crystal display (LCD)
• USB/LSB/CW/AM/FM/Packet/PSK-31/RTTY

Yaesu

HF/50MHz All Mode Transceiver

• Rugged construction in an Ultra Compact body
• Stable 100W Power Output with Dual Internal fans
• 3KHz roofing filter equipped as standard
• Detachable Front Panel
• Large dot matrix LCD display with quick Spetrum Scope

Yaesu

HF/VHF/UHF ALL MODE Transceiver

• NEW Dynamic Real-Time Spectrum Scope
• NEW Multi-Color Waterfall Display
• 3.5" TFT Full Color Touch Panel
• TX Frequency: 160M - 70CM.
• 100 watts HF/6M
  50 watts 2M/70CM
• High Speed Spectrum Scope
• Roofing Filter 3kHz and 15kHz
• 32-bit High Speed IF DSP
• IF Width & IF Shift
• 160-6M Built-in Antenna Tuner
• Built-in Electronic Keyer
• USB Connector(CAT control, Audio interface, PTT/SHIFT control)

Yaesu

Compact HF/50MHz 100W SDR Transceiver

OUT OF STOCK - DELIVERY WILL BE DELAYED

• 15 separate band pass filters
• Effective QRM rejection with the IF DSP (IF SHIFT/WIDTH, IF NOTCH DNF, DNR, COUNTOUR)
• High-quality and super stable final amplifier utilizing the new push-pull MOSFET RD70HUP2
• Aluminum Heat Sink with 80mm low-noise axial flow cooling fan
• High Speed Automatic Antenna Tuner with a large capacity 100-channel memory
• RF & AF Transmit Monitor
• Microphone Amplifier with Three-stage parametric Equalizer (SSB/ AM mode)
• QMB (Quick Memory Bank)
• Band Stack Function
• Mail-In Rebate Form(PDF)

12V Power

Powerpole crimping tool for 15/30/45 Amp powerpole contacts.

AIR

4 pin in line microphone jack connector

AIR

8 pin in line microphone jack connector

Alpha Delta

4 position coax switch with SO-239 connectors, good thru 500MHz. New precision machined switch shaft and quadrant rotating mechanism for more accurate and stable switching performance. Higher strength, lower resistance silver bearing solder. New brass ARC-PLUG housing for improved gas tube positioning.

Antenex

L-Bracket with 3/4" hole. For NMO style antennas. Black finish.

Antenex

118-970MHz 1/4 wave Mobile Antenna.

• Field Tunable.
• Unity Gain.
• Mount Type: NMO
• Black

Antenex

Flat Bracket with 3/4" hole. Stainless steel. For NMO style mounts.

ARC

Kenwood HF amp cable, plugs
into 8P mini DIN REMOTE jack on
transceiver w/RCA connectors
for amplifier RELAY and ALC.

ARC

Kenwood HF amp cable, plugs
into 7P DIN REMOTE jack on
transceiver w/RCA connectors
for amplifier RELAY and ALC.

ARC

100' RG-213(MIL-C-17) with Silver/Teflon PL-259 on each end - coax jumper.

ARC

12' RG-213(MIL-C-17) with Silver/Teflon PL-259 on each end - coax jumper.

ARC

18' RG-213(MIL-C-17) with Silver/Teflon PL-259 on each end - coax jumper.

ARC

25' RG-213(MIL-C-17) with Silver/Teflon PL-259 on each end - coax jumper.

ARC

3' RG-213(MIL-C-17) with Silver/Teflon PL-259 on each end - coax jumper.

ARC

50' RG-213(MIL-C-17) with Silver/Teflon PL-259 on each end - coax jumper.

ARC

6' RG-213(MIL-C-17) with Silver/Teflon PL-259 on each end - coax jumper.

ARC

75' RG-213(MIL-C-17) with Silver/Teflon PL-259 on each end - coax jumper.

ARC

This is a low loss, 50 ohm, double shielded coax assembly using Times Microwave Systems LMR240UF coax. The 14.5ft length is specifically made for CB radio applications. This specific length is 1/2 wavelength taking into account the velocity factor of the coax in use. In this case 80%. An exact half wavelength (or whole multiple there of ie. 14.5. 29.0, 43.5...) mirrors the load impedance. A perfectly tuned antenna (the load) will show a 50 ohm impedance and this is the impedance we want the transceiver to see.

ARC

Band switching data cable for Ameritron ALS-1306/606. 6 Ft cable connects to Icom HF transceivers with 13 Pin DIN ACC jack on rear panel. This cable allows the amplifier to automatically change bands, following the transceiver from band to band as well as keying the amp. Icom models include but not limited to: IC-718, 7100, 7200 and 7300.

ARC

Band switching data cable for Ameritron ALS-1306/606. 6 Ft cable connects to Icom HF transceivers with 7 Pin DIN ACC(2) jack on rear panel. This cable allows the amplifier to automatically change bands, following the transceiver from band to band as well as keying the amp. Icom models include but not limited to: IC-725, IC-735, IC-746, 746Pro, IC-756 and 756Pro series, IC-781, IC-7600, 7610, 7851 and others.

ARC

Band switching data cable for Ameritron ALS-1306/606. 6 Ft cable connects to Kenwood HF transceivers with RS-232 COMM port and REMOTE jack on rear panel. This cable allows the amplifier to automatically change bands, following the transceiver from band to band as well as keying the amp. Kenwood models include but not limited to: TS-570S, TS-590S, TS-890S, TS-990S and TS-2000.

ARC

Band switching data cable for Ameritron ALS-1306/606. 6 Ft cable connects to Yaesu HF transceivers with 10 Pin Mini DIN LINEAR jack on rear panel. This cable allows the amplifier to automatically change bands, following the transceiver from band to band as well as keying the amp. Yaesu models include but not limited to: FT-450, 950, 1200 and FTDX-10.

ARC

Band switching data cable for Ameritron ALS-1306/606. 6 Ft cable connects to Yaesu HF transceivers with DB-15 LINEAR jack on rear panel. This cable allows the amplifier to automatically change bands, following the transceiver from band to band as well as keying the amp. Yaesu models include but not limited to: FTDX-101D/MP and FTDX-3000.

ARC

Band switching data cable for Ameritron ALS-1306/606. 6 Ft cable connects to Yaesu HF transceivers with 8 Pin Mini DIN LINEAR jack on rear panel. This cable allows the amplifier to automatically change bands, following the transceiver from band to band as well as keying the amp. Yaesu models include but not limited to: FT-891, FT-991/A and FT-710 AESS/FIELD.

ARC

100' Genuine Times Microwave™ LMR-400DB(Direct Bury) with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.
• This coax is made with silicon gel between the jacket and dielectric to prevent water from migrating should the jacket be compromised.

ARC

100' Genuine Times Microwave™ LMR-400UF(Ultra-Flex) with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.
• Flexible TPE outer jacket.

ARC

12' Genuine Times Microwave™ LMR-400UF(Ultra-Flex) with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.
• Flexible TPE outer jacket.

ARC

20' Genuine Times Microwave™ LMR-400UF(Ultra-Flex) with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.
• Flexible TPE outer jacket.

ARC

25' Genuine Times Microwave™ LMR-400UF(Ultra-Flex) with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.
• Flexible TPE outer jacket.

ARC

3' Genuine Times Microwave™ LMR-400UF(Ultra-Flex) with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.
• Flexible TPE outer jacket.

ARC

4' Genuine Times Microwave™ LMR-400UF(Ultra-Flex) with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.
• Flexible TPE outer jacket.

ARC

50' Genuine Times Microwave™ LMR-400UF(Ultra-Flex) with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.
• Flexible TPE outer jacket.

ARC

6' Genuine Times Microwave™ LMR-400UF(Ultra-Flex) with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.
• Flexible TPE outer jacket.

ARC

75' Genuine Times Microwave™ LMR-400UF(Ultra-Flex) with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.
• Flexible TPE outer jacket.

ARC

9' Genuine Times Microwave™ LMR-400UF(Ultra-Flex) with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.
• Flexible TPE outer jacket.

ARC

Band switching data cable for Palstar LA-1K. 6 Ft cable connects to Elecraft K4 transceiver with DB-15HD ACC jack on rear panel. This cable allows the amplifier to automatically change bands, following the transceiver from band to band as well as keying the amp.

ARC

Band switching data cable for Palstar LA-1K. 6 Ft cable connects to Icom HF transceivers with 13 Pin DIN ACC jack on rear panel. This cable allows the amplifier to automatically change bands, following the transceiver from band to band as well as keying the amp. Yaesu models include but not limited to: IC-718, 7100, 7200 and 7300.

ARC

Band switching data cable for Palstar LA-1K. 6 Ft cable connects to Icom HF transceivers with 7 Pin DIN ACC(2) jack on rear panel. This cable allows the amplifier to automatically change bands, following the transceiver from band to band as well as keying the amp. Icom models include but not limited to: IC-725, IC-735, IC-746, 746Pro, IC-756 and 756Pro series, IC-781, IC-7600, 7610, 7851 and others.

ARC

Band switching data cable for Palstar LA-1K. 6 Ft cable connects to Kenwood HF transceivers with RS-232 COMM port and REMOTE jack on rear panel. This cable allows the amplifier to automatically change bands, following the transceiver from band to band as well as keying the amp. Kenwood models include but not limited to: TS-570S, TS-590S, TS-890S, TS-990S and TS-2000.

ARC

Band switching data cable for Palstar LA-1K. 6 Ft cable connects to Yaesu HF transceivers with 10 Pin Mini DIN LINEAR jack on rear panel. This cable allows the amplifier to automatically change bands, following the transceiver from band to band as well as keying the amp. Yaesu models include but not limited to: FT-450, 950, 1200 and FTDX-10.

ARC

Band switching data cable for Palstar LA-1K. 6 Ft cable connects to Yaesu HF transceivers with DB-15 LINEAR jack on rear panel. This cable allows the amplifier to automatically change bands, following the transceiver from band to band as well as keying the amp. Yaesu models include but not limited to: FTDX-101D/MP and FTDX-3000.

ARC

Band switching data cable for Palstar LA-1K. 6 Ft cable connects to Yaesu HF transceivers with 8 Pin mini DIN LINEAR jack on rear panel. This cable allows the amplifier to automatically change bands, following the transceiver from band to band as well as keying the amp. Yaesu models include but not limited to: FT-891, FT-991/A and FT-710 AESS/FIELD.

ARC

6 feet of 10 gauge red/black zip cord with ring terminals on one end & powerpole connectors on the other end.

ARC

6 feet 12 gauge red/black zip cord with powerpoles on one end & 4pin plug on the other end.

ARC

Powerpole Pig Tail.

• Use for FM or HF power cables
• Installation:
  Crimp or Solder
  Includes 2 pcs heat shrink
• Connectors:
  PowerPole/Butt Connector
• Accepts up to 10Ga wire
• Length: 9" of #10 wire

ARC

6" red/black zip cord with powerpole on one end and split powerpoles on the other end.

ARC

Amplifier interface with buffer relay for IC-706, 718, 7000, 7100, 7200, 7300, 7410, 9100 and other Icom radios with 13 pin DIN ACC port.

Allows transceiver to safely key any amplifier regardless of keying voltage - AC or DC.

Includes ALC line.

ARC

Amplifier interface with buffer relay for IC-728, 735, 736, 738, 746, 756, 761, 765, 781, 7600, 7700, 7800 and other Icom radios with 7 Pin DIN ACC2 port.

Allows transceiver to safely key any amplifier regardless of keying voltage - AC or DC.

Includes ALC line.

ARC

Amplifier interface with buffer relay for IC-9700 8 Pin DIN ACC port.

Allows transceiver to safely key any amplifier regardless of keying voltage - AC or DC.

Includes ALC line.

ARC

Amplifier interface with isolation buffer relay for Kenwood. Uses 7 pin DIN REMOTE port and external AT port on back panel of transceiver for control voltage. Allows transceiver to safely key any amplifier regardless of keying voltage - AC or DC.

Includes ALC line.

ARC

Amplifier interface with isolation buffer relay for Kenwood TS-480S/HX. Uses 8 pin mini DIN REMOTE port on front panel and external AT port on back panel of transceiver for control voltage. Allows transceiver to safely key any amplifier regardless of keying voltage - AC or DC.

Includes ALC line.

ARC

Amplifier interface with buffer relay for Yaesu FT-450, 950, 1200, FTDX-10 and other Yaesu radios with 10 pin mini DIN LINEAR port.

Allows transceiver to safely key any amplifier regardless of keying voltage - AC or DC.

Includes ALC line.

ARC

Amplifier interface with isolation buffer relay for Yaesu FTDX-101D/MP, 3000D and other radios with DB-15 LINEAR. Allows transceiver to safely key any amplifier regardless of keying voltage - AC or DC.

Includes ALC line.

ARC

Amplifier interface with buffer relay for FT-857, 897, 991/A, 710AESS/FIELD and other Yaesu radios with 8 pin mini DIN CAT/LINEAR port.

Allows transceiver to safely key any amplifier regardless of keying voltage - AC or DC.

ARC

Amplifier interface with isolation buffer relay - all RCA. Fits many Yaesu transceivers such as FT-990, FT-1000 series, FTDX-5000 series as well as any model with rear panel TX GND, ALC and 13.8V RCA jacks. Allows transceiver to safely key any amplifier regardless of keying voltage - AC or DC.

Includes ALC line.

ARC

KPC-3 TNC to Radio* Cable.

• Most radio cables are listed under catalog search "Cables - TNC". If your radio is not on this list, you may use this to order. Most, but not all, cables are $39.95.
• If your cable is more than $39.95 we will contact you before proceeding.
• Cables are made of 4' shielded cable.
• These cables are custom made for your specific radio.

*You will need to specify your radio model in the Special Instructions during check out.

ARC

Kam XL HF w/CW to Radio* Cable.

• Cables are made of 4' shielded cable.
• These cables are custom made for your specific radio.
• Covers most Icom, Kenwood and Yaesu transceivers. Contact us for quote on other brands.

ARRL

Receiving Antennas for the Radio Amateur
This book focuses entirely on active and passive receiving antennas and their associated circuits..
Size: 256 pages

ARRL

Portable Operating for Amateur Radio

Includes:
• Types of Portable Operating, Organizing and Carrying your Equipment, Radios for Portable Operating, Power Sources, Portable Antennas, Propagation and Spotting, On the Air Activities, Accessories and Tools, Logging Contacts, Online Resources
• Size: 176 pages

ARRL

ARRL Operating Manual
12th Edition
Everything for hams to get involved, get active, and get on the air. Softcover Edition.
Size: 240 pages

ARRL

Log Book.
This spiral log book is a useful tool for every ham shack.
Size: 52 log pages.
(1300 total log entries)

ARRL

Here to There: Radio Wave Propagation

• Here to There: Radio Wave Propagation presents the principles of amateur radio propagation in an easy-to-understand style. Knowing ionospheric structures, how they form, and which bands they interact with will prepare you for practical operating and help you make the most of your time on the air.
• Pages: 208

ARRL

Parks on the Air Book

• A POTA Book for Park Activators and Hunters!
• The Parks on the Air® Book explores the process of activating a park unit and hunting those activations. Through the experiences of 14 operators, it offers advice and motivation for taking your radio out to the park and becoming active in the growing POTA community.
• Size: 144 pages

ARRL

ARRL Handbook 101 Softcover

• The ARRL Handbook is your complete guide to wireless technology experimentation, practice, and development. Use its more than 1,200 pages of amateur radio know-how to delve into radio electronics, circuit design, digital modulation techniques, and equipment construction.

ARRL

Satellite Operating for Amateur Radio

• Discover the excitement of amateur radio satellites and start making contacts from the very first pass. Learn antennas, tracking apps, and tips for beginners and experienced hams alike to get on the air and point your antenna at the sky!
• Softcover: 176 pages

ARRL

Minilog Book.
Pocket-sized logbook. 96 wire-bound log pages. Room for 720 contacts.

ARRL

Your Introduction to Morse Code.
Don't just learn the code--master it. This set includes 2 AUDIO CD's with 2 1/2 hours of practice.

ARRL

Basic Antennas.
Explore GPS: its history, how it works, and navigating with a GPS receiver. An introduction to antennas--basic concepts, practical designs, and easy-to-build antennas!

Big Kansas Coil

Portable 80-6 Meter HF Vertical Antenna

• Covers 3.5-54Mhz with only 102" whip
• Includes 112", 7 section collapsible whip
• Coil assembly consists of 16ga Stainless Steel wire wound on a carbon fiber and nylon 3D printed form
• Quick change tap allows for fast and easy band setting
• Printed scale on coil provides accurate recording of tap position for quick band changes
• 3/8 x 24 inserts on bottom and top allow coil to accept standard whips and mounting hardware
• Coil is conservatively rated for 100 watts FT8
• Will handle up to 200W PEP
• This package includes tripod adapter, (3) 18" legs and (1) 43"x118" faraday ground cloth
• Tripod adapter has ring on bottom allowing it to be secured to user supplied weight or earth anchor
• Carrier for legs is included

ARC

Mic cable allows Yaesu M-70D or M90D to be used with Yaesu FTM series VHF/UHF mobile radios with RJ-12 6 pin modular microphone jack. Note: It is common for operators to adjust the mic gain up from the factory default when using a desk mic.

ARC

DB-9(m) to Icom 2 pin speaker mic with right angle connector. Connects 1200 baud port on Kantronics TNC to Icom HT. Specifically made for the ID-51A but will work with other Icom radios with speaker mic jack on the side of the radio.

ARC

DB-9(m) to Kenwood 13P DIN accessory. Connects 1200 baud port on Kantronics TNC to Kenwood transceivers such as TS-2000S and 2000X

ARC

DB-9(m) to Icom RJ-45 mic and external speaker. Connects 1200 baud port on Kantronics TNC to Icom mobile radios with the RJ-45 mic jack such as IC-2100, 2200, 2300, 2730, 4100, 5100, V3500, V8000 and others.

ARC

DB-9(m) to Icom 8 pin DIN. Connects 1200 baud port on Kantronics TNC to Icom transceivers. Works with IC-820H, 821H and IC-9700*. Also works with HF radios with 8 pin DIN ACC port when 1200 baud PACKET is desired for 10M use.

*Note: When used with IC-9700 the KPC-3+ TX TAIL command must be advanced to accommodate the internal delay of the IC-9700. We suggest a starting point of 30.

Feel free to call us if you have any questions regarding the IC-9700.

ARC

DB-9(m) to Anytone mobile with RJ45 microphone. Connects 1200 baud port on Kantronics TNC to Anytone RJ45. NOTE: Not all Anytone mobile radios with RJ45 mic will work. The AT-D578UV WILL NOT WORK and there may be others. Please contact us to confirm compatibility with your model.

ARC

DB-9(m) to Alinco round 8 pin mic and external speaker jack. Connects 1200 baud port on Kantronics TNC to Alinco DR-110, 112, 130, 140, and 430.

ARC

DB-9(m) to Motorola 16 pin accy. Connects 1200 baud port on Kantronics TNC to Motorola GM-300, 400 and Maxtrac.

ARC

DB-9(m) to Baofeng RJ-45 microphone and external speaker jack.

ARC

DB-9(m) Icom IC-705. Connects 1200 baud port on Kantronics TNC to the IC-705 SPKR/MIC jack.

ARC

Kantronics 1200 baud TNC to Icom IC-9700 cable.

ARC

DB-9(m) KAM XL HF port to Icom 8P DIN ACC(1). Compatible models include but not limited to IC-725, 726, 728, 735, 736, 737, 738, 746, 746Pro, 756/Pro/ProII/ProIII, 781, 7600, 77200, 7800 and 7850

ARC

DB-9(m) KAM XL HF port to Icom 8P DIN ACC(1) and CW key. Compatible models include but not limited to IC-725, 726, 728, 735, 736, 737, 738, 746, 746Pro, 756/Pro/ProII/ProIII, 781, 7600, 77200, 7800 and 7850

ARC

DB-9(m) KAM XL HF port to Icom 13P DIN ACC. Compatible models include but not limited to IC-706/MKII/MKIIG, 718, 7000, 7100, 7200, 7300, 7410 and 9100.

ARC

DB-9(m) KAM XL HF port to Icom 13P DIN ACC and CW key. Compatible models include but not limited to IC-706/MKII/MKIIG, 718, 7000, 7100, 7200, 7300, 7410 and 9100

ARC

DB-9(m) KAM XL HF port to Kenwood ACC(2) 13P DIN. Compatible models include TS-440S and TS-940S

ARC

DB-9(m) KAM XL HF port to Kenwood ACC(2) 13P DIN and CW key. Compatible models include TS-440S and TS-940S

ARC

DB-9(m) KAM XL HF port to Kenwood ACC(2) 13P DIN. Compatible models include but not limited to TS-140S, 450S, 570S/G, 590S/G, 680S, 690S, 850S, 950S/SD/SDX and 2000S/X.

ARC

DB-9(m) KAM XL HF port to Kenwood ACC(2) 13P DIN and cW key. Compatible models include but not limited to TS-140S, 450S, 570S/G, 590S/G, 680S, 690S, 850S, 950S/SD/SDX and 2000S/X.

ARC

DB-9(m) KAM XL HF port to Yaesu 5 pin DIN PACKET jack. Compatible models include but not limited to FT-920, 990, 1000D/MP, 2000 and FTDX-5000.

ARC

DB-9(m) KAM XL HF port to Yaesu 5 pin DIN PACKET jack and CW key. Compatible models include but not limited to FT-920, 990, 1000D/MP, 2000 and FTDX-5000.

ARC

DB-9(m) KAM XL HF port to Yaesu 4 pin DIN RTTY jack. Compatible models include but not limited to FT-920, 990, 1000D/MP, 2000 and FTDX-5000.

ARC

DB-9(m) KAM XL HF port to Yaesu 4 pin DIN RTTY jack and CW key. Compatible models include but not limited to FT-920, 990, 1000D/MP, 2000 and FTDX-5000.

ARC

DB-9(m) KAM XL HF port to Yaesu 6 Mini pin DIN RTTY/DATA jack. Compatible models include but not limited to FT-100, 450, 710, 817, 818, 847, 857, 897, 950, 991, FTDX-1200 and 3000. Note that this cable provides both AFSK and FSK but not all radios utilize the FSK capability.

ARC

DB-9(m) KAM XL HF port to Yaesu 6 Mini pin DIN RTTY/DATA jack and CW key. Compatible models include but not limited to FT-100, 450, 710, 817, 818, 847, 857, 897, 950, 991, FTDX-1200 and 3000. Note that this cable provides both AFSK and FSK but not all radios utilize the FSK capability.

ARC

8 pin DIN KAM/Plus HF port to Kenwood ACC(2) 13P DIN. Compatible models include but not limited to TS-140S, 450S, 570S/G, 590S/G, 680S, 690S, 850S, 950S/SD/SDX and 2000S/X.

ARC

This TNC to radio cable connects the 8 pin DIN HF port of your Kantronics KAM or KAM Plus to late Yaesu transceivers 6 pin mini DIN rear panel DATA/RTTY port. This cable supports AFSK and FSK operation. KAM and KAM Plus HF modes include: Packet, PACTOR, GTOR, AMTOR, RTTY and ASCII.

Calrad

Banana plug - black

Comet

Adapts an SO-239 connector to accept a 3/8x24 antenna.

Comet

Black DualBand 146/446MHz Mobile Antenna.

• Length: 12 inches
• Max Power: 50 watts
• Mount Type: UHF

Gain & Wave:
• 146MHz -dBi 1/4 wave
• 446MHz 2.15dBi 1/2 wave

Comet

Black DualBand 146/446MHz Mobile Antenna.

• Length: 12 inches
• Max Power: 50 watts
• Mount Type: NMO

Gain & Wave:
• 146MHz -dBi 1/4 wave
• 446MHz 2.15dBi 1/2 wave

Comet

Black 146/446MHz Wideband Mobile Antenna.

• Length: 40 inches
• Max Power: 150 watts
• Mount Type: UHF

Gain & Wave:
• 146MHz 3.3dBi 5/8 wave
• 446MHz 6.2dBi 5/8 wave x 3

Comet

Black 146/446MHz Wideband Mobile Antenna.

• Length: 40 inches
• Max Power: 150 watts
• Mount Type: NMO

• 146MHz 3.3dBi 5/8 wave
• 446MHz 6.2dBi 5/8 wave x 3

Comet

160-6M Manual Antenna Tuner

• Tune dipoles, verticals, mobile whips, long wires and other antenna designs.
• Input impedance: 50 Ohm
• Output impedance: 10 –600 Ohm
• Two power ranges: 30W and 300W
• Weight: 6 lb approximate
• Dimensions: 10 x 4 x 8 inches approximate
• Backlit cross needle SWR meter requires 12VDC for light.

Comet

Antenna Bracket for Icom IC-705 and Yaesu FT-817/FT-818.
Radio and Antenna NOT included.

Comet

Black 146/446MHz Mobile Antenna.

• Length: 38 inches
• Max Power: 120 watts FM
• Mount Type: UHF

Gain & Wave:
• 146MHz 3.0dBi 1/2 wave

Comet

Black 146/446MHz Mobile Antenna.

• Length: 38 inches
• Max Power: 120 watts FM
• Mount Type: NMO

Gain & Wave:
• 146MHz 3.0dBi 1/2 wave

Comet

Dual-band 2M/70cm HT Antenna. Surprising performance in a small package.

• Length: 1.75"
• Max power: 10 watts
• Extended receive range: 118-160MHz, 250-290MHz, 360-390MHz, 420-470MHz, 820-960MHz, 1260-1300MHz
• Connector: SMA,
  hard plastic radome

• 0dBi 1/4 wave

Comet

Black 146/446MHz mobile antenna with spring base.

• Length: 18"
• Max Power: 60 watts
• Mount Type: UHF

Gain & Wave:
• 146MHz 2.15dBi 1/4 wave
• 446MHz 3.8dBi 5/8 wave

Comet

Black 146/446MHz mobile antenna with spring base.

• Length: 27"
• Max Power: 80 watts
• Mount Type: UHF


Gain & Wave:
• 146MHz 2.15dBi 1/2 wave
• 446MHz 4.15dBi 5/8 wave

Comet

Black 146/446MHz mobile antenna with spring base.

• Length: 27"
• Max Power: 80 watts
• Mount Type: NMO


Gain & Wave:
• 146MHz 2.15dBi 1/2 wave
• 446MHz 4.15dBi 5/8 wave

Yaesu

Mobile bracket for FTM-200, 300, 500 and 6000 series mobile radios.

Davis RF

RG-58CU Coax

• Stranded Center Conductor
• Solid Polyethylene Dielectric
• Outer Diameter: .195
• Shield: 95% Bare Copper Braid
• Non-Contaminating jacket
• Velocity Factor: .66
• 50 ohms

DAVIS RF

RG-59/U Type Coax.

• Solid Center Conductor
• Solid Polyethylene Dielectric
• Outer Diameter: .240
• Shield: 95% Bare Copper Braid
• Velocity Factor: .66
• 75 ohms

Davis RF

Mini 8/U(RG-8X)Type Coax.

• Stranded Center Conductor
• Foam Polyethylene Dielectric
• Outer Diameter: .240
• Shield: 95% Bare Copper Braid
• Velocity Factor: .78
• 50 ohms

Diamond

Compact Dummy Load.

• Frequency: DC-500MHz
• Rated Power:
  15w continuous, 100w peak.
• Connector: PL-259

Diamond

Trunk/Hatchback mount for 3/8x24 stud.

• Ideal for medium weight antennas
• 3/8x24 stud on mount
  PL-259 on coax.
• Overall Cable Length: 6.5'

Diamond

Heavy-duty Trunk/Hatchback Mount.

• SO-239 on mount
  PL-259 on coax.
• Overall Cable Length: 6.5'
• Use C110 to mount radio at front of vehicle

Diamond

Heavy-duty Trunk/Hatchback Mount.

• NMO on mount
  PL-259 on coax.
• Overall Cable Length: 6.5'
• Use C110 to mount radio at front of vehicle

Diamond

Heavy-duty Trunk/Hatchback Mount.

• SO-239 on mount
  Includes SMA to UHF Adapter
• Use with HT or Mobile
• Overall Cable Length: 13.5'

Diamond

Heavy-duty Trunk/Hatchback Mount.

• NMO on mount
  Includes SMA to UHF Adapter
• Use with HT or Mobile
• Overall Cable Length: 13.5'

Diamond

Black 146/446MHz Mobile Antenna.

• Length: 13.8"
• Max Power: 100 watts
• Mount Type: NMO

Gain:
• 146MHz 2.15dBi
• 446MHz 2.15dBi

Diamond

Black 146/446MHz Mobile Antenna.

• Length: 33.5"
• Max Power: 100 watts
• Mount Type: NMO

Gain:
• 146MHz 2.15dBi
• 446MHz 5.3dBi

Diamond

Black 146/446MHz Mobile Antenna.

• Length: 40.2"
• Max Power: 200 watts
• Mount Type: UHF

• 146MHz 3.0 dBi
• 446MHz 5.5 dBi

Diamond

Black 146/446MHz Mobile Antenna.

• Length: 38.2"
• Max Power: 200 watts
• Mount Type: NMO

• 146MHz 3.0 dBi
• 446MHz 5.5 dBi

Diamond

Black 146/446MHz Mobile Antenna. Includes HRKS adhesive backed UHF mount, 13.5' RG316 teflon coax cable with SMA, and UHF adapter.

• Length: 40.2"
• Max Power: 200 watts
• Mount: UHF

Gain:
• 146MHz 3.0dBi
• 146MHz 5.5dBi

Diamond

Compact 3.5-150MHZ SWR/Power METER.

• Power range: 30/300W
• Cross-needle design
• Connectors: UHF

Diamond

Compact 144-470MHZ SWR/Power METER.

• Power range: 30/300W
• Cross-needle design
• Connectors: UHF

DK

75 Amp Heavy-Duty Alligator Clips. Red/Black. One Pair.

DXE

RG-213/U Type Coax.

• MIL-C-17
• Non-contaminated jacket
• Stranded Center Conductor
• Solid Polyethylene Dielectric
• Outer Diameter: .405
• Shield: 97% Bare Copper Braid
• 50 ohms

FIRESTICK

Stainless Steel mirror mount for 3/8 x 24 stud mount antennas. Unit has SO-239 coax connector. The clamp may be omitted which will allow the angle bracket to be used as a side bracket on any flat vertical surface, such as the side of a motorhome, back of a Jeep, the back of bed rails or tool boxes.

Heil Sound

Polished-chrome/black base stand

• Ideal for Heil Microphones
• 'Soft Touch' Push-to-Talk switch

Heil Sound

Heil HM-12 Microphone

• 'Genesis' dynamic element
• Satin black
• Internal Windscreen
• Heil CC-1 series cable required

Heil Sound

Heil PR-10 Package

• This small but mighty microphone will bring your radio to life with full speech articulation and perfect balance.
• Includes compact PR10 microphone, an LB-1 table base w/LED backlit transmit status light, and an adjustable 8" mic boom to bring the mic up to a comfortable operating position during use.
• Heil CC-1 XLR series cable required.

Heil Sound

Heil PR-781 Microphone

• Heil PR Dynamic element
• Includes the SM-3 mount
• Black Satin Epoxy finish
• Heil CC-1 XLR K,Y or I series cable required

Heil Sound

Heil PR-781 Microphone

• Heil PR Dynamic element
• Includes the SM-3 mount
• Black Satin Epoxy finish w/gold screen
• Heil CC-1 XLR K,Y or I series cable required

Heil Sound

Heil Industrial Headset

• Color: Black
• Dynamic HC-7 Element
• Dual Side Headset
• Weight: 17 ounces

Heil Sound

Heil Industrial Headset

• Color: Black
• IC Electret Element
  
• Dual Side Headset
• Weight: 17 ounces
• AD-1 Required

Heil Sound

Vertical Surface Mount

• The WM-1 is a unique mount for the Heil booms that allows them to be mounted on a vertical surface.
• The brass insert of the WM-1 insures smooth, perfect fit.
• The brass insert accepts a 1/2" Stem.

Install Bay

12/10 gauge power tap - 3 pack.

Install Bay

3M Disconnect - Female Nylon Fully Insulated. 16/14 gauge.
4 pack.

Install Bay

22/18 gauge power tap - 3 pack.

Install Bay

15 amp ATC fuse. 2 pack.

Install Bay

20 amp ATC fuse. 2 pack.

Install Bay

25 amp ATC fuse. 2 pack.

Install Bay

30 amp ATC fuse. 2 pack.

Install Bay

40 amp ATC fuse. 2 pack.

Install Bay

5 amp ATC fuse. 2 pack.

Install Bay

7.5 amp ATC fuse. 2 pack.

Install Bay

12/10 gauge #38 yellow ring terminals. 4 pack.

Install Bay

12/10 gauge #516 yellow ring terminals. 4 pack.

Install Bay

12/10 gauge #10 yellow spade terminals. 4 pack.

Icom

High Voltage Insulators.

Approximately 2" long plus hardware.
• 5/8" mounting hole.
• Price is $14.95 each.
• Currently have 18 in stock.

Icom

HF/6M Compact Automatic Antenna Tuner for the IC-705.

Icom

Desktop Rapid Charger. Includes BC-123SA AC Adapter

Icom

AA Battery Pack.
(requires 3 AA batteries - not included)

Icom

Compact speaker microphone with slim L-type connector.

Icom

Replacement 8 pin round hand microphone.

Icom

144/440MHz 50W Mobile Transceiver.

OUT OF STOCK - DELIVERY WILL BE DELAYED

• Large high-contrast LCD screen with backlight
• V/V & U/U simultaneous receive capability
• Power: 50 Watts
• RX: 118-174 & 375-550MHz
• 1000 Memory Channels
• Hands-free capable with optional UT-133

Icom

144/440MHz 50W Mobile

• The Deluxe version includes the MBA-5 remote head bracket.
• Large high-contrast LCD screen with backlight
• V/V & U/U simultaneous receive capability
• Power: 50 Watts
• RX: 118-174 & 375-550MHz
• 1000 Memory Channels
• Hands-free capable with optional UT-133

Icom

Black Edition 144/440MHz 50W Mobile Transceiver.

• Large, high-contrast, Black inverted LCD Screen
• V/V & U/U simultaneous receive capability
• Power: 50 Watts
• RX: 118-174 & 375-550MHz
• 1000 Memory Channels

Icom

HF/6M 100W SDR Transceiver

• Improved RMDR and Phase Noise Characteristics
• Lower Heat Generation and Lower Power Consumption
• HDMI™ Port for an External Display
• RX Antenna IN/OUT Connectors
• Built-in CW Decoder
• Simplified RS-BA1 Remote Control
• USB Type-C™ with Dual COM + Audio

Icom