Manufacturer

Description

Price

Order

ARC

3' Genuine Times Microwave™ LMR-400 with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.

Icom

HF/6 Field Transceiver

• IF DSP
• AGC loop management
• Digital IF filter
• Manual notch filter
• Digital noise reduction and noise blanker
• Rugged design for outdoor use

Icom

HF/50MHz Touchscreen Transceiver

• Large touchscreen with waterfall function
• Real-time spectrum scope
• Built-in automatic antenna tuner
• SD memory card slot for saving data
• Approximately 97dB RMDR
• 15 discrete band-pass filters
• Power: 100 watts(25W AM)
• Icom Online Submission Rebate Form

Icom

HF/50MHz All Mode Transceiver

OUT OF STOCK - DELIVERY WILL BE DELAYED

Kenwood

HF/50MHz All Mode
Transceiver

• 100W output
• Automatic antenna tuner
• Separate LCD control panel with speaker
• Electronic memory keyer
• CW auto tune
• 1750Hz tone
• Direct frequency entry
• Wide-narrow deviation

Kenwood

HF/50MHz All Mode Transceiver

OUT OF STOCK - DELIVERY WILL BE DELAYED

• All the same great features of the TS-590S with some incremental changes help performance and function.
• DDS in 1st mixer on main receiver improves dynamic range.
• DRV connector switchable to antenna output function.(convenient when connecting to external receiver)
• Morse Code Decoder.
• New Split function(TS-990S-style) enabling quick configuration added in addition to existing Split setting.
• Front or rear PTT selectable for Data PTT
• Large display with superior visibility.

Yaesu

HF/50MHz SDR Transceiver

• Unmatched SDR technology emphasizes the Receiving Performance
• 1.8MHz – 50MHz(Amateur bands only)
• Power Output: 5 - 100W (5 – 25W AM Carrier)
• High Resolution 4.3-inch TFT Color Touch Panel Display
• Includes SP-40 speaker.

Yaesu

HF/VHF/UHF 5W BACKPACK TRANSCEIVER

• Ultra compact HF/VHF/UHF multimode rig
• Wide receiver frequency coverage
• Two antenna connectors for ease of installation
• Outstanding CW features
• Versatile, easy-to-see liquid crystal display (LCD)
• USB/LSB/CW/AM/FM/Packet/PSK-31/RTTY

Yaesu

HF/6 Transceiver

• 4.3" TFT Full Color Display
• TX Frequency: 160-6M
• Power: 100 watts
• Roofing filters(3/6/15kHz)
• 32-bit High Speed IF DSP
• IF Width & IF Shift
• Antenna Tuner

Yaesu

100W HF/50MHz Transceiver

• TX Frequency: 160-6M
• General Coverage Receive
• Power: 100W
• IF DSP
• Large 4.3" TFT color Display
• Built-in High Speed Antenna Tuner
• High Speed Spectrum Scope

Yaesu

2M/440MHz FM Dual Band Mobile Transceiver

• The FTM-150R is the same as the FTM-150RASP but without the ASP (Audio Digital Signal Processing Unit) installed. The ASP module (SPU-1) can be installed at a later date updating the radio to the full ASP version.
• Power: 55W VHF/50W UHF
• True Dual band operation:
  (V+V, U+U, V+U, U+V)
• Heavy Duty Heat Sink
• Super-DX
• A Front spkr is furnished inside the control head along with the main body spkr.

Yaesu

50W VHF/UHF Dual Band Digital C4FM/ FM Mobile Transceiver.

• System Fusion Compatible
• 50W High-Power with Heavy Duty Heat Sink.
• 2" QVGA Full-Color TFT Display
• 1104 Memory Channels
• 3W audio power speaker
• High Precision 66 channel GPS receiver.
• PMG-SR Monitor(Primary Memory Group with a single Receiver)

Yaesu

144/430MHz C4FM/FM Mobile Transceiver

• The FTM-510DR ASP shares the core feature set as the current FTM-500DR yet equipped with the new Super-DX and ASP (Audio Digital Signal Processor Unit).
• 55W(VHF)/50W(UHF)

Yaesu

10W QRP HF/50/144/430 All Mode SDR Transceiver

• 6W(5W for QRP) Field Operation with the supplied Li-ion Battery.
• 10W Field Operation with external DC power supply.

Yaesu

100W HF/50/144/430 All Mode SDR Transceiver

• 100W Base Station Operation w/external DC power supply.
• 6W(5W for QRP)Field Operation with the supplied Li-ion Battery
• 10W Field Operation with external DC power supply

AIR

UHF(F) 1" bulkhead adapter with 2 nuts.

Alpha Delta

Low loss Coax Lightning Surge Protector.

OUT OF STOCK - DELIVERY WILL BE DELAYED

• Freq range: DC-500MHz
• Power: 200W
• Connectors: UHF(F)

Alpha Delta

Low loss Coax Lightning Surge Protector.

OUT OF STOCK - DELIVERY WILL BE DELAYED

• Freq range: DC-500MHz
• Power: 2KW
• Connectors: UHF(F)

Antenex

VHF/UHF/800MHz Mobile Scanner Antenna. For Receive ONLY. NMO Mount.

ARC

3' LMR100 UHF(F) on both ends - coax jumper.

ARC

Kenwood HF amp cable, plugs
into 8P mini DIN REMOTE jack on
transceiver w/RCA connectors
for amplifier RELAY and ALC.

ARC

Kenwood HF amp cable, plugs
into 7P DIN REMOTE jack on
transceiver w/RCA connectors
for amplifier RELAY and ALC.

ARC

3' RG-58 with BNC(M) on one end and UHF(M) on the other end - coax jumper.

ARC

6' RG-58 with BNC(M)on one end and UHF(M) on the other end - coax jumper.

ARC

4' LMR100 with SMA(M)on one end and UHF(F) on the other end. This coax jumper works great with HT's that use a SMA(M) connector.

ARC

4' LMR100 with BNC(M) on one end and UHF(F) on the other end. This coax jumper works great for HT's that use a BNC connector.

ARC

4' LMR100 with SMA(F)on one end and UHF(F) on the other end. This coax jumper works great with HT's that use a SMA(F) connector.

ARC

5 ft. lighter power cord for VHF mobile radios.

ARC

SWL Antenna for Portables

Classic end fed long wire consists of 30' of #24 insulated antenna wire with Bayonett plug. Plugs directly into the center conductor of the coax jack on most table top shortwave receivers as well as HF transceivers.

ARC

SWL Antenna for Portables

Classic end fed long wire consists of 30' of #24 insulated antenna wire with BNC connector. Instantly improves the HF reception of your hand held receiver.

ARC

Band switching data cable for Ameritron ALS-1306/606. 6 Ft cable connects to Icom HF transceivers with 13 Pin DIN ACC jack on rear panel. This cable allows the amplifier to automatically change bands, following the transceiver from band to band as well as keying the amp. Icom models include but not limited to: IC-718, 7100, 7200 and 7300.

ARC

Band switching data cable for Ameritron ALS-1306/606. 6 Ft cable connects to Icom HF transceivers with 7 Pin DIN ACC(2) jack on rear panel. This cable allows the amplifier to automatically change bands, following the transceiver from band to band as well as keying the amp. Icom models include but not limited to: IC-725, IC-735, IC-746, 746Pro, IC-756 and 756Pro series, IC-781, IC-7600, 7610, 7851 and others.

ARC

Band switching data cable for Ameritron ALS-1306/606. 6 Ft cable connects to Yaesu HF transceivers with 10 Pin Mini DIN LINEAR jack on rear panel. This cable allows the amplifier to automatically change bands, following the transceiver from band to band as well as keying the amp. Yaesu models include but not limited to: FT-450, 950, 1200 and FTDX-10.

ARC

Band switching data cable for Ameritron ALS-1306/606. 6 Ft cable connects to Yaesu HF transceivers with DB-15 LINEAR jack on rear panel. This cable allows the amplifier to automatically change bands, following the transceiver from band to band as well as keying the amp. Yaesu models include but not limited to: FTDX-101D/MP and FTDX-3000.

ARC

Band switching data cable for Ameritron ALS-1306/606. 6 Ft cable connects to Yaesu HF transceivers with 8 Pin Mini DIN LINEAR jack on rear panel. This cable allows the amplifier to automatically change bands, following the transceiver from band to band as well as keying the amp. Yaesu models include but not limited to: FT-891, FT-991/A and FT-710 AESS/FIELD.

ARC

4' LMR100 with BNC(M)on one end and UHF(M) on the other end - coax jumper.

ARC

4' LMR100 with SMA(M) on one end and UHF(M) on the other end - coax jumper.

ARC

4' LMR100 with UHF(M) on one end and UHF(M) on the other end - coax jumper.

ARC

100' Genuine Times Microwave™ LMR-400 with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.

ARC

125' Genuine Times Microwave™ LMR-400 with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.

ARC

12' Genuine Times Microwave™ LMR-400 with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.

ARC

150' Genuine Times Microwave™ LMR-400 with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.

ARC

18' Genuine Times Microwave™ LMR-400 with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.

ARC

25' Genuine Times Microwave™ LMR-400 with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.

ARC

30' Genuine Times Microwave™ LMR-400 with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.

ARC

50' Genuine Times Microwave™ LMR-400 with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.

ARC

6' Genuine Times Microwave™ LMR-400 with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.

ARC

75' Genuine Times Microwave™ LMR-400 with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.

ARC

100' Genuine Times Microwave™ LMR-400DB(Direct Bury) with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.
• This coax is made with silicon gel between the jacket and dielectric to prevent water from migrating should the jacket be compromised.

ARC

100' Genuine Times Microwave™ LMR-400UF(Ultra-Flex) with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.
• Flexible TPE outer jacket.

ARC

12' Genuine Times Microwave™ LMR-400UF(Ultra-Flex) with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.
• Flexible TPE outer jacket.

ARC

20' Genuine Times Microwave™ LMR-400UF(Ultra-Flex) with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.
• Flexible TPE outer jacket.

ARC

25' Genuine Times Microwave™ LMR-400UF(Ultra-Flex) with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.
• Flexible TPE outer jacket.

ARC

3' Genuine Times Microwave™ LMR-400UF(Ultra-Flex) with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.
• Flexible TPE outer jacket.

ARC

4' Genuine Times Microwave™ LMR-400UF(Ultra-Flex) with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.
• Flexible TPE outer jacket.

ARC

50' Genuine Times Microwave™ LMR-400UF(Ultra-Flex) with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.
• Flexible TPE outer jacket.

ARC

6' Genuine Times Microwave™ LMR-400UF(Ultra-Flex) with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.
• Flexible TPE outer jacket.

ARC

75' Genuine Times Microwave™ LMR-400UF(Ultra-Flex) with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.
• Flexible TPE outer jacket.

ARC

9' Genuine Times Microwave™ LMR-400UF(Ultra-Flex) with silver/Teflon PL-259 connectors installed.

• Connectors have both braid AND center conductor soldered.
• This low loss coax assembly is suitable for all HF/VHF/UHF applications up to and including 450MHz.
• Flexible TPE outer jacket.

ARC

Band switching data cable for Palstar LA-1K. 6 Ft cable connects to Icom HF transceivers with 13 Pin DIN ACC jack on rear panel. This cable allows the amplifier to automatically change bands, following the transceiver from band to band as well as keying the amp. Yaesu models include but not limited to: IC-718, 7100, 7200 and 7300.

ARC

Band switching data cable for Palstar LA-1K. 6 Ft cable connects to Icom HF transceivers with 7 Pin DIN ACC(2) jack on rear panel. This cable allows the amplifier to automatically change bands, following the transceiver from band to band as well as keying the amp. Icom models include but not limited to: IC-725, IC-735, IC-746, 746Pro, IC-756 and 756Pro series, IC-781, IC-7600, 7610, 7851 and others.

ARC

Band switching data cable for Palstar LA-1K. 6 Ft cable connects to Yaesu HF transceivers with 10 Pin Mini DIN LINEAR jack on rear panel. This cable allows the amplifier to automatically change bands, following the transceiver from band to band as well as keying the amp. Yaesu models include but not limited to: FT-450, 950, 1200 and FTDX-10.

ARC

Band switching data cable for Palstar LA-1K. 6 Ft cable connects to Yaesu HF transceivers with DB-15 LINEAR jack on rear panel. This cable allows the amplifier to automatically change bands, following the transceiver from band to band as well as keying the amp. Yaesu models include but not limited to: FTDX-101D/MP and FTDX-3000.

ARC

Band switching data cable for Palstar LA-1K. 6 Ft cable connects to Yaesu HF transceivers with 8 Pin mini DIN LINEAR jack on rear panel. This cable allows the amplifier to automatically change bands, following the transceiver from band to band as well as keying the amp. Yaesu models include but not limited to: FT-891, FT-991/A and FT-710 AESS/FIELD.

ARC

6 feet 12 gauge red/black zip cord with powerpoles on one end & 4pin plug on the other end.

ARC

Powerpole Pig Tail.

• Use for FM or HF power cables
• Installation:
  Crimp or Solder
  Includes 2 pcs heat shrink
• Connectors:
  PowerPole/Butt Connector
• Accepts up to 10Ga wire
• Length: 9" of #10 wire

ARC

Powerpole Pig Tail with ring terminals.

• Use for FM or HF power cables
• Connectors:
  PowerPole/Ring Terminal
• Length: 9" of #10 wire

ARC

FM Mobile Fused Power Cable

• Fits most FM radios using the "T-style" connector.
• Powerpoles installed.
• T-Style connector
• Length: 15'of #14 wire

ARC

Kam XL VHF to Radio* Cable.

• Cables are made of 4' shielded cable.
• These cables are custom made for your specific radio.

ARC

Kam XL HF to Radio* Cable.

• Cables are made of 4' shielded cable.
• These cables are custom made for your specific radio.

*You will need to specify your radio model in the Special Instructions during check out.

ARC

Kam XL HF w/CW to Radio* Cable.

• Cables are made of 4' shielded cable.
• These cables are custom made for your specific radio.

ARRL

Amateur Radio Transceiver Performance Testing
Understanding HF transceiver data from QST Product Reviews. Great for Amateur Radio operators looking to purchase a transceiver!
Size: 128 pages

ARRL

HF Dipole Antennas for Radio Amateur
20 innovative antenna projects you can build yourself.
Size: 120 pages

ARRL

Get On the Air with HF Digital 3rd Edition A step-by-step guide that will get you started in the fascinating world of HF digital technology!
Size: 144 pages.

Big Kansas Coil

Portable 80-6 Meter HF Vertical Antenna

• Covers 3.5-54Mhz with only 102" whip
• Includes 112", 7 section collapsible whip
• Coil assembly consists of 16ga Stainless Steel wire wound on a carbon fiber and nylon 3D printed form
• Quick change tap allows for fast and easy band setting
• Printed scale on coil provides accurate recording of tap position for quick band changes
• 3/8 x 24 inserts on bottom and top allow coil to accept standard whips and mounting hardware
• Coil is conservatively rated for 100 watts FT8
• Will handle up to 200W PEP
• This package includes tripod adapter, (3) 18" legs and (3) 33 ft radials
• Tripod adapter has ring on bottom allowing it to be secured to user supplied weight or earth anchor
• Carrier for legs is included

Big Kansas Coil

Portable 80-6 Meter HF Vertical Antenna

• Covers 3.5-54Mhz with only 102" whip
• Includes 18 ft telescopic whip
• Coil assembly consists of 16ga Stainless Steel wire wound on a carbon fiber and nylon 3D printed form
• Quick change tap allows for fast and easy band setting
• Printed scale on coil provides accurate recording of tap position for quick band changes
• 3/8 x 24 inserts on bottom and top allow coil to accept standard whips and mounting hardware
• Coil is conservatively rated for 100 watts FT8
• Will handle up to 200W PEP
• This package includes tripod adapter, (3) 18" legs and (3) 33 ft radials
• Tripod adapter has ring on bottom allowing it to be secured to user supplied weight or earth anchor
• Carrier for legs is included

Big Kansas Coil

Portable 80-6 Meter HF Vertical Antenna

• Covers 3.5-54Mhz with only 102" whip (whip not included)
• Coil assembly consists of 16ga Stainless Steel wire wound on a carbon fiber and nylon 3D printed form
• Quick change tap allows for fast and easy band setting
• Printed scale on coil provides accurate recording of tap position for quick band changes
• 3/8 x 24 inserts on bottom and top allow coil to accept standard whips and mounting hardware
• Coil is conservatively rated for 100 watts FT8
• Will handle up to 200W PEP
• This package includes tripod adapter, (3) 18" legs and (3) 33 ft radials
• Tripod adapter has ring on bottom allowing it to be secured to user supplied weight or earth anchor
• Carrier for legs is included

ARC

Mic cable allows Yaesu M-70D or M90D to be used with Yaesu FTM series VHF/UHF mobile radios with RJ-12 6 pin modular microphone jack. Note: It is common for operators to adjust the mic gain up from the factory default when using a desk mic.

ARC

Kantronics 1200 baud TNC to radio cable.

• DB-9(m) to 6 pin mini DIN plug.
• Connects 1200 baud port on Kantronics TNC to most late model VHF/UHF dual band FM transceivers with DATA port.

Compatible models include but not limited to:

• KENWOOD:TM-733A, V7A, V708A, V71A, D700A, D710A/G
• ICOM: IC-706MKIIG, Ic-2720, IC-7100
• YAESU: FT-100, 875/D, 897/D, 7800, 8800 and 8900

ARC

DB-9(m) to Kenwood 2 pin speaker mic. Connects 1200 baud port on Kantronics TNC to all Kenwood hand held VHF/UHF transceivers EXCEPT TH-2500. Also fits Chinese radios that are speaker mic compatible with Kenwood. Models include but not limited to Tytera, Wouxun and, Baofeng.

ARC

DB-9(m) to Icom 8 pin DIN. Connects 1200 baud port on Kantronics TNC to Icom transceivers. Works with IC-820H, 821H and IC-9700*. Also works with HF radios with 8 pin DIN ACC port when 1200 baud PACKET is desired for 10M use.

*Note: When used with IC-9700 the KPC-3+ TX TAIL command must be advanced to accommodate the internal delay of the IC-9700. We suggest a starting point of 30.

Feel free to call us if you have any questions regarding the IC-9700.

ARC

Kantronics 1200 baud TNC to radio cable.

• DB-9(m) to 3.5mm 4 cond plug
• Connects 1200 baud port on Kantronics TNC to Baofeng mobile VHF/UHF dual band FM transceivers with TRRS port.

Compatible models include but not limited to:

• Btech:UV-25x2, UV-25x4 UV-50x2

ARC

DB-9(m) KAM XL HF port to Icom 8P DIN ACC(1). Compatible models include but not limited to IC-725, 726, 728, 735, 736, 737, 738, 746, 746Pro, 756/Pro/ProII/ProIII, 781, 7600, 77200, 7800 and 7850

ARC

DB-9(m) KAM XL HF port to Icom 8P DIN ACC(1) and CW key. Compatible models include but not limited to IC-725, 726, 728, 735, 736, 737, 738, 746, 746Pro, 756/Pro/ProII/ProIII, 781, 7600, 77200, 7800 and 7850

ARC

DB-9(m) KAM XL HF port to Icom 13P DIN ACC. Compatible models include but not limited to IC-706/MKII/MKIIG, 718, 7000, 7100, 7200, 7300, 7410 and 9100.

ARC

DB-9(m) KAM XL HF port to Icom 13P DIN ACC and CW key. Compatible models include but not limited to IC-706/MKII/MKIIG, 718, 7000, 7100, 7200, 7300, 7410 and 9100

ARC

DB-9(m) KAM XL HF port to Kenwood ACC(2) 13P DIN. Compatible models include TS-440S and TS-940S

ARC

DB-9(m) KAM XL HF port to Kenwood ACC(2) 13P DIN and CW key. Compatible models include TS-440S and TS-940S

ARC

DB-9(m) KAM XL HF port to Kenwood ACC(2) 13P DIN. Compatible models include but not limited to TS-140S, 450S, 570S/G, 590S/G, 680S, 690S, 850S, 950S/SD/SDX and 2000S/X.

ARC

DB-9(m) KAM XL HF port to Kenwood ACC(2) 13P DIN and cW key. Compatible models include but not limited to TS-140S, 450S, 570S/G, 590S/G, 680S, 690S, 850S, 950S/SD/SDX and 2000S/X.

ARC

DB-9(m) KAM XL HF port to 6 pin mini DIN. Compatible models include but not limited to Kenwood TS-480S/HX, Yaesu FT-450/D, 817/ND, 857/D, 897/D, 950, 991/A, FTDX-1200 and 3000.

ARC

DB-9(m) KAM XL HF port to 6 pin mini DIN and CW key. Compatible models include but not limited to Kenwood TS-480S/HX, Yaesu FT-450/D, 817/ND, 818, 857/D, 897/D, 891, 991/A, FT-950, FTDX-1200 and 3000.

ARC

DB-9(m) KAM XL HF port to Icom 24Pin molex. Compatible models include but not limited to IC-740, 745 and 751/A

ARC

DB-9(m) KAM XL HF port to Icom 24Pin molex and CW key. Compatible models include but not limited to IC-740, 745 and 751/A

ARC

DB-9(m) KAM XL HF port to Yaesu 5 pin DIN PACKET jack. Compatible models include but not limited to FT-920, 990, 1000D/MP, 2000 and FTDX-5000.

ARC

DB-9(m) KAM XL HF port to Yaesu 5 pin DIN PACKET jack and CW key. Compatible models include but not limited to FT-920, 990, 1000D/MP, 2000 and FTDX-5000.

ARC

DB-9(m) KAM XL HF port to Yaesu 4 pin DIN RTTY jack. Compatible models include but not limited to FT-920, 990, 1000D/MP, 2000 and FTDX-5000.

ARC

DB-9(m) KAM XL HF port to Yaesu 4 pin DIN RTTY jack and CW key. Compatible models include but not limited to FT-920, 990, 1000D/MP, 2000 and FTDX-5000.

ARC

DB-9(m) KAM XL HF port to Yaesu 6 Mini pin DIN RTTY/DATA jack. Compatible models include but not limited to FT-100, 450, 710, 817, 818, 847, 857, 897, 950, 991, FTDX-1200 and 3000. Note that this cable provides both AFSK and FSK but not all radios utilize the FSK capability.

ARC

DB-9(m) KAM XL HF port to Yaesu 6 Mini pin DIN RTTY/DATA jack and CW key. Compatible models include but not limited to FT-100, 450, 710, 817, 818, 847, 857, 897, 950, 991, FTDX-1200 and 3000. Note that this cable provides both AFSK and FSK but not all radios utilize the FSK capability.

ARC

8 pin DIN KAM/Plus HF port to Kenwood ACC(2) 13P DIN. Compatible models include but not limited to TS-140S, 450S, 570S/G, 590S/G, 680S, 690S, 850S, 950S/SD/SDX and 2000S/X.

ARC

This TNC to radio cable connects the 8 pin DIN HF port of your Kantronics KAM or KAM Plus to late Yaesu transceivers 6 pin mini DIN rear panel DATA/RTTY port. This cable supports AFSK and FSK operation. KAM and KAM Plus HF modes include: Packet, PACTOR, GTOR, AMTOR, RTTY and ASCII.

Comet

Black DualBand 146/446MHz Mobile Antenna.

• Length: 12 inches
• Max Power: 50 watts
• Mount Type: UHF

Gain & Wave:
• 146MHz -dBi 1/4 wave
• 446MHz 2.15dBi 1/2 wave

Comet

Black 146/446MHz Wideband Mobile Antenna.

• Length: 40 inches
• Max Power: 150 watts
• Mount Type: UHF

Gain & Wave:
• 146MHz 3.3dBi 5/8 wave
• 446MHz 6.2dBi 5/8 wave x 3

Comet

HF/6M-440MHz Duplexer with one lead.

• Band Pass & Max Power:
  1.3-30MHz 600 watts
  50-470MHz 600 watts
• Connectors:
  Common: PL-259
  Low Pass: SO-239
  High Pass: SO-239
  

Comet

HF-6M/2M-440MHz duplexer with two leads.

• Band Pass & Max Power:
  1.3-57MHz 350 watts
  75-550MHz 350 watts
• Connectors:
  Common: SO-239
  Low Pass: PL-259
  High Pass: PL-259

Comet

4.5inch UHF Magnet Mount

• UHF mount on the magnet, coax terminates in a soldered on PL-259 connector.
• For antennas up to 48" tall.
• Length: 16' 2" of RG-58A/U.
• Plastic film covers the magnet to help prevent scratching.

Comet

Standard Cable Assembly 16 feet 9 inches of RG-58/U coax with UHF (PL-259/SO-239) connectors.

Comet

Chrome 146/446MHz High Performance Mobile Antenna.

• Length: 62 inches
• Max Power: 150 watts
• Mount Type: UHF


Gain & Wave:
• 146MHz 5.1dBi 7/8 wave x 2
• 446MHz 7.7dBi 5/8 wave x 3

Comet

Portable, 10 band telescoping HF Antenna

• 160/80/40/30/20/17/15/12/10/6M bands
• Min Length: 14.25” approx.
• Max Length: 75.5” approx.
• Weight: 14.3 oz
• Conn: PL-259

Comet

Black 146/446MHz Mobile Antenna.

• Length: 38 inches
• Max Power: 120 watts FM
• Mount Type: UHF

Gain & Wave:
• 146MHz 3.0dBi 1/2 wave

Comet

Black 146/446MHz mobile antenna with spring base.

• Length: 18"
• Max Power: 60 watts
• Mount Type: UHF

Gain & Wave:
• 146MHz 2.15dBi 1/4 wave
• 446MHz 3.8dBi 5/8 wave

Comet

Black 146/446MHz mobile antenna with spring base.

• Length: 27"
• Max Power: 80 watts
• Mount Type: UHF


Gain & Wave:
• 146MHz 2.15dBi 1/2 wave
• 446MHz 4.15dBi 5/8 wave

Daiwa

4-Position Antenna Switch

• Frequency Range: DC to 500 MHz
• Antenna Connector: SO-239 (UHF)
• Max Power Rating: 2.5KW (PEP), 1KW (CW)
• Insertion Loss: Less than 0.2dB
• Protection: Selecting an unused Port can prevent radio damage during a storm
• VSWR: Less than 1.2:1
• Output Ports: 4
• Isolation: More than 60dB (200 MHz)

Diamond

The use of Teflon 1/8" diameter coax, which is very flexible, and small mini-UHF connectors allow for easy installation through tight vehicle body panels.

• Overall Length: 6.5'
• Connectors: NMO/PL-259

Diamond

Quad-Band Mobile Antenna. 10M/2M/6M/70cm
Designed for the FT-8900R.

• Length: 50"
• Max Power: 60 watts
• Mount Type: UHF

Gain:
• 10/6/2M 2.15dBi
• 70cm: 5.5dBi

Diamond

Mirror & Luggage Rack Mount.

• U-Bolt Capacity: 1 1/16"
• Connector: UHF (5/8" hole)
• Dimensions: 3 1/8" x 1 1/2" x 1 5/8"(w) x 1/8" (thick)

Diamond

The D130J Super Discone Antenna is an ultra-wideband antenna covering amateur radio, commercial 2-way, cellular, air traffic control and various utility frequency bands.

• Bands: 25-1300MHz
• Height: 5.6'
• Max Power:
  146MHz up: 200 watts
  6M: 20 watts FM, 50 watts PEP
• Connector: UHF

Diamond

Mobile Mini Discone Antenna.

• Bands:
  RX: 100-1600MHz
  TX: 144/440/904/1200MHz
• Height: 35.5"
• Max Power: 50 watts
• Connector: UHF

Gain:
• 144/904/1200MHz 2.15dBi
• 440MHz 5.5dBi

Diamond

Heavy-duty Trunk/Hatchback Mount.

• SO-239 on mount
  Includes SMA to UHF Adapter
• Use with HT or Mobile
• Overall Cable Length: 13.5'

Diamond

Heavy-duty Trunk/Hatchback Mount.

• NMO on mount
  Includes SMA to UHF Adapter
• Use with HT or Mobile
• Overall Cable Length: 13.5'

Diamond

Medium-duty Trunk mount for tight spots.

• 1.5" mounting width
• SO-239 on mount
  Includes SMA to UHF adapter
• Use with HT or Mobile
• Overall Cable Length: 13.5'

Diamond

Medium-duty Trunk Mount for tight spots.

• 1.5" Mounting width
• NMO on mount
  Includes SMA to UHF adapter
• Use with HT or Mobile
• Overall Cable Length: 13.5'

Diamond

Black 146/446MHz Mobile Antenna.

• Length: 40.2"
• Max Power: 200 watts
• Mount Type: UHF

• 146MHz 3.0 dBi
• 446MHz 5.5 dBi

Diamond

Black 146/446MHz Mobile Antenna. Includes HRKS adhesive backed UHF mount, 13.5' RG316 teflon coax cable with SMA, and UHF adapter.

• Length: 40.2"
• Max Power: 200 watts
• Mount: UHF

Gain:
• 146MHz 3.0dBi
• 146MHz 5.5dBi

Diamond Antenna

HF Screwdriver Mobile Antenna

• Bands: 3.5 - 30MHz
• Power Supply voltage &
  current: DC 12v 100mA
• Max Power Rating: 200W (SSB)
• Height: Approx. 66" (28 MHz)
  Approx. 73" (3.5 MHz)
• Weight: 1.1kg
• Connector: 3/8x24 Thread
• Type: 1/4 wavelength center loading
• VSWR: Less than 2.0 / Impedance: 50Ω
• Up-down time:
  Approx. 50 sec. (3.5-30Mhz)
  Approx 20 sec. (7-30MHz)

Diamond

Compact 3.5-150MHZ SWR/Power METER.

• Power range: 30/300W
• Cross-needle design
• Connectors: UHF

Diamond

Compact 144-470MHZ SWR/Power METER.

• Power range: 30/300W
• Cross-needle design
• Connectors: UHF

Hustler

The Hustler 5-BTV is a 5-band Vertical HF Fixed Station Antenna.

OUT OF STOCK - DELIVERY WILL BE DELAYED

• 10, 15, 20, 40, 75/80M
• Power: full legal limit CW and SSB 1000W
• Ground mount with or without radials or elevated mount with radials.
• Height: 25.1 feet
• Weight: 17 pounds

Hustler

The Hustler 6-BTV is a 6-band Vertical HF Fixed Station Antenna.

OUT OF STOCK - DELIVERY WILL BE DELAYED

• 10, 15, 20, 30, 40, 75/80M
• Power: full legal limit SSB or CW 1000W
• Ground mount with or without radials or elevated mount with radials.
• Height: 24 feet
• Weight: 16.5 pounds

Icom

HF/6M Compact Automatic Antenna Tuner for the IC-705.

Icom

Deluxe HF/6/2/440

• IF DSP
• AGC loop performance controlled by DSP
• Digital IF filters
• 2-point Manual notch filter
• Digital noise reduction
• Digital noise blanker
• 35W output in 70cm band

Icom

HF/VHF/UHF Portable QRP Transceiver

• HF/50/144/430 MHz All Mode, with D-Star DV
• Maximum output power:
  10W (13.8 V DC)
  5W (BP-272)
• Compact & Lightweigt Design
• Large touchscreen color display
• RF direct sampling system
• Real-time spectrum scope
  and waterfall display.

Icom

HF/6/2/440 Multi-Mode Transceiver

OUT OF STOCK - DELIVERY WILL BE DELAYED

• Power: HF/6 100W
  2M 50W, 440MHz 35W
• D-Star Built-in
• Touch Screen Control
• Angled Display
• SD Memory Card Slot for Saving Data
• Built-in RTTY Functions
• DSP Controlled AGC Function Loop
• Voice Memory Function

Icom

HF Mobile Radio W/UT-106

OUT OF STOCK - DELIVERY WILL BE DELAYED


• Power 100 watts
• Front mounted loud speaker
• 0.03-29.999999 MHz general coverage receiver
• Built-in DSP with noise reduction and automatic notch filter
• IF shift
• Digital S/RF meter
• Much more...

Icom

HF/6 100W Transceiver

• All mode (SSB/CW/RTTY/AM/FM)
• Built-in automatic antenna tuner.
• Built-in simple band scope.
• 32-bit floating point DSP unit.
• Large monochrome LCD display.
• Double Conversion Superheterodyne.
• Three first IF filters.

Icom

HF/6 Transceiver

• Dual DSP for transmitter/receiver and spectrum scope
• 104dB dynamic range and +30dBm third-order intercept point (IP3)
• Double conversion superheterodyne dramatically improves inband IMD
• Dual AGC loops controlled by DSP
• Three built-in 1st IF (roofing) filters, including 3kHz
• Digital IF filter
• Digital notch filter
• Noise reduction and noise blanker
• 5.8 inch ultra-wide viewing angle TFT display
• Spectrum scope
• Much more...
• Icom Mail-In Rebate Form

Icom

200W HF/50MHz Base Transceiver

OUT OF STOCK - DELIVERY WILL BE DELAYED

• Full Control Head with Separated RF Deck
• Dual, Independent Receivers
• DIGI-SEL and Preamp
• Built-in Automatic Antenna Tuner
• Dual Spectrum Scope and Waterfall
• Dual Speakers

Icom

HF/6/2/440 Tranceiver with Autotuner

• HF to 1200MHz Multi-band in one transceiver(1200MHz optional)
• Independent dual receivers
• Satellite mode operation
• RTTY demodulator and decoder
• Ample CW functions
• Double conversion superheterodyne
• Three first IF filters (3/6/15kHz) for HF/50MHz band
• HF/50MHz, 144MHz 100W, 430/440MHz 75W

Icom

HF/6M Amplifier

OUT OF STOCK - DELIVERY WILL BE DELAYED

• 1 kW Output at Full Duty Cycle
• Remote controller compatible
• 65V LDMOS power transistors
• High-efficiency internal power supply
• Built-in 2x6 automatic antenna selector
• RX-ANT connectors for multi-band BPF
• Internal automatic antenna tuner
• SO2R, Single-Operator Two-Radio, capable

Icom

144/430MHz VHF/UHF D-STAR Digital/Analog HT

• Easy D-STAR Settings for Beginners
• Band Scope with Waterfall display.
• Dualwatch function of VHF/VHF, VHF/UHF, and UHF/UHF.
• VHF Airband and FM broadcast receiver capability.
• Same optional accessories can be shared with the ID-52/ID-51/ID-31 series transceivers.

Icom

144/430MHz VHF/UHF D-STAR Digital/Analog HT

• Large 2.3" color screen.
• A full-color waterfall display.
• Dualwatch with new DV/DV mode.
• Integrated GPS
• Integrated Bluetooth
• Receives: 88-174/225-479MHz
• Transmits: 144-148/430-450MHz

Icom

Standard DC Power Cable for
HF(6-pin).

Icom

Remote control USB encoder.

• The Icom RC-28 is an optional USB encoder that can be used with the RS-BA1 IP Remote Control Software. This device will connect to the USB port on your PC via the supplied USB cable. Utilizing the same tuning knob and encoder used on Icom HF radios, this accessory provides a "radio-feel" option to complement the IP remote control software. The RC-28 controls features a sturdy push-to-talk and two user-programmable function keys.

Icom

External Speaker for Mobiles/HF.

Icom

External Speaker designed specifically as a companion for the IC-7610, but will work with all Icom HF rigs.

Kantronics

• ALL Mode Dual Port Modem
• Packet:
  (300/1200/9600 baud)
• GTOR, Pactor I, RTTY, CW
• Dual Port Mailbox
• HF and/or VHF/UHF Operations
• plus many more features...

Kenwood

HF/50/144/440MHz
All Mode Transceiver

• 100W on HF/50/144MHz
  50W on 440MHz
• Automatic antenna tuner
  (HF-6M)
• Built-in TNC (1200/9600)
• Built-in RS-232 for computer control
• Built-in TCXO
• IF DSP Main Band
• AF DSP Sub Band

Kenwood

HF/50MHz All Mode Transceiver

• 100W heavy-duty design
• 32-bit floating point DSP
• 500 Hz/2.7 kHz roofing filters
• Automatic antenna tuner
• USB port for PC connectivity
• DSP noise reduction
• Large display with 2-color LED backlight

Kenwood

HF/50MHz All Mode Transceiver

OUT OF STOCK - DELIVERY WILL BE DELAYED

HF/6M Transceiver w/Advanced DSP

• High-speed independent band scope
• Noise reduction function
• 7" TFT color display
• 120 channel memory
• Screen capture
• Multiple USB connections
• Power: 100 watts
• many more options.....
• NO Mic Included

LP

BNC(M) to UHF(F) adapter

LP

FME(M) to mini UHF(M) adapter

LP

FME(M) to UHF(M) adapter

LP

Mini UHF(F) crimp connector - RG58 cable size

LP

mini UHF(M) crimp connector - RG58 cable size

LP

mini UHF(M) crimp connector - RG8X cable size

LP

mini UHF(M) to UHF(F) adapter

LP

mini UHF(M) to TNC(M) adapter

LP

mini UHF(F) to UHF(M) adapter

LP

N(M) to UHF(F) adapter

LP

N(F) to UHF(F) adapter.

LP

UHF(M) 2pc solder connector - silver/teflon

LP

SMA(M) to UHF(F) adapter

LP

SMA(F) to UHF(M) adapter

LP

SMA(F) to UHF(F) adapter

LP

SMA(F) to MINI UHF(F) adapter

LP

UHF(M) crimp connector - RG58 cable size

LP

UHF(M) crimp connector - LMR400 cable size

LP

UHF(M) crimp connector - LMR240/RG8X cable size

LP

UHF(F) chassis mount connector

LP

UHF(F) square chassis mount connector

LP

UG-175 reducer - silver/teflon - RG58 cable size

LP

UG-176 reducer - silver/teflon - RG8X cable size

LP

UHF(M) to UHF(M) adapter

LP

UHF(F) to UHF(F) adapter

LP

UHF(F) to UHF(F) 2" bulkhead adapter

LP

UHF(F)(M)(F) T adapter.