Manufacturer

Description

Price

Order

LDG

The AT-1000ProII will tune from 1.8 to 54.0 MHz continuously, and will match an amazing range of antennas.

• 1000W SSB/750W CW
  500W Digital/250W 6M
• Two position antenna switch with 2000 memories for each position.
• Weight: 5.0 pounds
• Includes DC power cable.

LDG

The AT-100PROII desktop tuner covers all frequencies from 1.8-54 MHz, and will automatically match your antenna in no time!

• 1-125W (SSB and CW)
• 100W on 6M
• 4000 Memories
• Weight: 1.5 pounds
• Includes DC power cable.

LDG

The AT-200PROII desktop tuner covers all frequencies from 1.8-54 MHz, and will automatically match your antenna in no time.

• 5-250W (SSB and CW)
• 100W on 6M
• 4000 Memories
• Weight: 2 pounds
• Includes DC power cable.

LDG

The AT-600PROII will tune from 1.8-54MHz continuously and will handle up to 600 watts. Designed to work with the mid-sized amps.

• 600W SSB/CW
  300W RTTY(250W on 6M)
• Easy to read LED bar graph display for RF power, SWR and status.
• Two position antenna switch with memories for each position.
• 4000 Memories
• For Dipoles, Verticals, Vs, Beams or Coax Fed Antennas.
• Weight: 3 pounds
• Includes DC power cord

LDG

• Description:
  The IC-PAC interface cable(14" long) provides DC power and control between the radio and the autotuner.
• Supported Radios:
  This interface cable will work with any Icom radio that supports the Icom AH-3 or AH-4 Tuner. Please check your radio's manual.
• Functionality:
  Pressing the tune button quickly on the tuner by-passes the tuner. Pressing and holding the tune button on the radio or tuner starts the tune process.

LDG

• Remote 1:1 current balun.
• 1.8 to 30 MHz.
• Up to 200 watts.

LDG

• Remote 4:1 Voltage balun.
• 1.8 to 30 MHz.
• Up to 200 watts

LDG

• Remote 4:1 Unun.
• 1.8 to 30 MHz.
• Up to 200 watts.

LDG

• Description:
  12" cable interface between select Yaesu radios and LDG Generic tuners. Does not supply DC to tuner.
• Radios:
  FT-857, FT-897, FT-891, FT-100 series (including "D" models) and FT-991.
• Functionality:
  Pressing the tune button on the tuner changes the mode of the radio to CW (mode change does not appear on radio display), tunes, then returns the radio to the previous mode.
  For FT-991, set menu item 143 to L AMP (for Linear Amp) and use the ALC/REM jack (red end to radio).

LDG

Automatic Antenna Tuner - 1.8 - 54 MHz - 125W PEP / 30W Digital Wth Interface Cables.

• Controlled from Icom Tuner button on radio or Push button on Tuner.
• Frequency Range: 1.8 to 54MHz
• Maximum Input Power: 125W PEP(CW/SSB/AM)
  30W (Digital/RTTY/FM)
• Tuning Range: 10:1 SWR
• Memories: 2000
• Voltage: 13.8 VDC + 15%
• Current Draw: 500 mA tuning, 20mA idle
• Size: 6.3"x6.3"x1.5"
• Weight: 1.5 lbs

LDG

The Z-100PLUS is small and simple to use.

• 1.8-54MHz coverage
• 0.1-125W on SSB/CW and digital modes.
• 2000 Memories
• Includes DC power cable

LDG

The Z-11PROII is everything you always wanted in a small portable tuner designed from the ground up for battery operation.

• 1.8-54MHz coverage
• 0.1-125W SSB/CW
  100W on 6M
• 2000 Memories
• Includes DC power cable.